Canon EOS C200B EOS C200 EOS C200B Instruction Manual - Page 166

Connecting to a Wi-Fi Network 166 Searching for Access Points The camera will automatically detect access points in the vicinity. After you select the desired access point, you only need to enter the selected network's password to connect the camera. For details about the access point's network name (SSID) and password refer to the wireless router's instruction manual or consult the network administrator in charge of the access point. Current access point/Total number of active access points detected Network name (SSID) Encrypted access point 1 After you select [Search for Access Points], the camera will search for active access points in the vicinity and display a list of available options on the screen. 2 Push the joystick up/down to select the desired access point and then press the joystick. 3 If necessary, select the WEP index key. • This step is only necessary if the Wi-Fi network's authentication method is set to [Shared Key] or if the encryption method is set to [WEP]. 4 To enter the [Encryption Key] (password), select [Input] and then press the joystick. • Enter the password of the selected Wi-Fi network using the keyboard screen (A 35). 5 Continue with the procedure to configure the IP address assignment (A 163).