Canon EOS C200B EOS C200 EOS C200B Instruction Manual - Page 143
Playback Controls, Adjusting the Volume, Audio Output
View all Canon EOS C200B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Playback Playback Controls The following playback types are available using the onscreen joystick guide and any of the joysticks. Playback type Fast playback Frame advance/reverse Return to playback mode Operation During playback, push the joystick up or down. Repeat to increase the playback speed to approximately 5x 15x 60x the normal speed. During playback pause, push the joystick up or down. Press the joystick itself. Alternatively, you can press the Ò button. 143 NOTES • There is no audio during any of the playback types listed in the previous table. • During some playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the playback picture. • The speed indicated on the screen is approximate. • If the clip's bit rate setting includes Long GOP compression, during frame advance, the time advanced between frames is approximately 0.5 seconds. Adjusting the Volume You can use the speaker or connect headphones to the × (headphone) terminal to listen to the audio during playback. Adjust the headphone volume with the > [¡ ! Audio Setup] > [Speaker Volume] or [Headphone Volume] setting. If you set an assignable button to [Headphones +] or [Headphones -] (A 125), you can press the button to adjust the headphone volume without using the menu. The audio signal will also be output from the SDI terminal and HDMI OUT terminal. NOTES • For details on changing the audio channel, refer to Audio Output (A 158). × (headphone) terminal