Canon EOS C200B EOS C200 EOS C200B Instruction Manual - Page 109

Using Metadata Using Metadata The camera automatically adds metadata to XF-AVC clips while they are being recorded. You can use Canon XF Utility to check and search for specific metadata. You can also create and transfer a user memo remotely using Browser Remote on a connected Wi-Fi device (A 170). 109 Metadata components Metadata User Memo: clip title, creator, location and description. GPS information: altitude, latitude and longitude. Information about the recording: scene and take. Information about camera settings: shutter speed, ISO speed/gain value, etc. Unique Material Identifiers (UMID): country, organization and user codes based on the SMPTE standard. Camera - Ü2 Ü -4 Ü (A 188) Entering content Canon XF Utility Ü1 Ü3 - - Browser Remote Ü Ü - Checking content Canon XF Utility Ü Ü Ü - Ü - - - 1 User memo files need to be created using the software and saved on an SD card in advance. 2 Only when an optional GP-E2 GPS Receiver is attached to the camera. While recording, GPS information is recorded automatically by the camera (A 111). 3 GPS information can only be added to clips already recorded. 4 Recording data is logged automatically by the camera. Operating modes: Setting a User Memo Created with Canon XF Utility Before you can add a user memo, you must first install Canon XF Utility (A 159). Next, create the user memo and then save it to an SD card. Once you insert the SD card in the camera and select the user memo, it will be added to clips you record. 1 Use Canon XF Utility to save a user memo to an SD card. • For details, refer to Managing User Memo Profiles in the Canon XF Utility Instruction Manual. 2 Insert the SD card into SD card slot B. 3 Open the metadata [Setting] submenu. > [3 $ Recording/Media Setup] > [Metadata] > [Setting] 4 Select [SD Card] and then press the joystick. 5 Open the [User Memo] submenu. > [3 $ Recording/Media Setup] > [Metadata] > [User Memo] 6 Select the file name of the desired user memo and then press the joystick. • The Q icon appears on the left of the screen. • Select [Off] to record clips without a user memo. NOTES • After you set a user memo, do not remove the SD card while you are recording. If the SD card is removed, the user memo will not be added to the clip. • You must set the user memo before you start recording for it to be added to the clip. You cannot change the user memo already added to a clip using the camera but you can do so with Canon XF Utility. • When the optional GP-E2 GPS Receiver is attached to the camera and the GPS function is activated, the user memo information will not be recorded, even if you have selected a user memo file from the SD card.