Canon EOS C200B EOS C200 EOS C200B Instruction Manual - Page 147

Clip Operations Adding Shot Marks During playback, you can add a shot mark (!) to frames that you want to set apart in an XF-AVC clip. Operating modes: 147 Adding Shot Marks during Playback To add a shot mark to a clip during playback or playback pause, you must first set an assignable button to [Add Shot Mark] in advance. 1 Set an assignable button to [Add Shot Mark] (A 125). 2 During playback or playback pause, press the assignable button at the point in the clip to add the shot mark. • A message indicating the shot mark appears on the screen and the shot mark is added to the clip. • Adding a shot mark to a clip during playback will pause the playback. NOTES • Up to 100 shot marks can be added to a single clip. • There may be up to a 0.5 second delay between the frame shown when you press the assignable button and the frame to which the camera adds the shot mark. Deleting All Shot Marks in a Clip from the Index Screen Operating modes: 1 Select the desired clip and then press the joystick to open the clip menu. 2 Select [Del. All Shot Marks] and then press the joystick. • The clip information screen appears and it prompts you to confirm the operation. 3 Select [OK] and then press the joystick. • All shot marks in the selected clip are deleted and the screen changes back to the previous index screen. Deleting Clips You can delete clips from a CFast or SD card one at a time. To delete XF-AVC clips with an $ mark, delete the $ mark beforehand (A 146) Operating modes: 1 Select the desired clip and then press the joystick to open the clip menu. 2 Select [Delete Clip] and then press the joystick. • The clip information screen appears and it prompts you to confirm the operation. 3 Select [OK] and then press the joystick. • Select [Cancel] instead to cancel the operation. • While the clip is being deleted, the operation cannot be canceled. 4 When the confirmation message appears, press the joystick.