Canon EOS C200B EOS C200 EOS C200B Instruction Manual - Page 53
Adjusting the Black Balance, Attach the body cap to the lens mount.
View all Canon EOS C200B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Adjusting the Black Balance Adjusting the Black Balance You can have the camera adjust the black balance automatically when ambient temperature changes considerably or if there is a noticeable change in a true black video signal. 53 Operating modes: 1 Attach the body cap to the lens mount. • If a lens was attached, turn off the camera and remove the lens. Place the body cap back on the lens mount and turn on the camera. 2 Open the [ABB] screen. > [v & Camera Setup] > [ABB] 3 Select [OK] and then press the joystick. • The automatic black balance procedure will start. It will take approximately 40 seconds, depending on the frame rate. 4 When the confirmation message appears, press the joystick. • If the sensor is not completely shielded from light, [Error] will appear on the screen. Press the joystick and repeat the procedure from the beginning. NOTES • Adjusting the black balance is necessary in the following cases: - When using the camera for the very first time or after a long period of not using it. - After sudden or extreme changes in ambient temperature. - After changing the ISO speed/gain settings. - After resetting the camera's settings or all the settings. - After activating or deactivating slow motion recording mode (including switching to another special recording mode). • During the adjustment of the black balance, you may notice some irregular displays appear on the screen. This is not a malfunction.