Canon EOS C200B EOS C200 EOS C200B Instruction Manual - Page 28

Preparing the Handle Unit and LCD Monitor Preparing the Handle Unit and LCD Monitor Attaching the HDU-2 Handle Unit 28 1 Attach the handle unit to the camera. 2 Use the hex wrench1 (for 0.64 cm, 1/4" screws) and turn the lock screw and hex socket head bolt1 to secure the handle unit firmly. 1 Supplied with the HDU-2. NOTES • The handle unit has 0.64 cm (1/4") sockets, giving you the option to attach a variety of commercially available accessories. • The handle unit has two through-holes (∅ 8.8 mm (0.35 in.)) that are 35.5 mm (1.4 in.) apart center-to-center. Attaching and Removing the LM-V1 LCD Monitor By attaching the LA-V1 LCD Attachment Unit1 to the LM-V1 LCD Monitor1, you can attach the LCD monitor to the HDU-2 Handle Unit1 or directly to the camera body itself. For details on adjusting the LCD monitor, refer to Using the LCD Monitor (A 40) and Adjusting the LCD Screen or Viewfinder (A 41). You can also use an optional LM-V2 LCD Monitor with the camera. If you use the LM-V2 in combination with an optional LA-V2 LCD Attachment Unit, you can attach it to the handle unit or camera unit in the same way as the LM-V1. The operating procedure of the LM-V2 and adjustment procedure of the screen are the same as for the LM-V1. 1 Supplied accessory for the C200; optional accessory for the C200B. Attaching the LCD Monitor To attach the LCD monitor to the handle unit 1 Set the Q switch to OFF. ባ ቢ 2 Rotate the LCD monitor mount 180° toward the LCD attachment unit lock screw (ቢ) and attach the LCD monitor (ባ). • Align the Í marks on the LCD monitor and LCD monitor mount. • Use the hex wrench1 (for 0.64 cm, 1/4" screws) to secure it firmly with the LCD monitor fixation bolt on the LCD monitor mount. 1 Supplied with the HDU-2. • Based on your needs, you can mount the LCD monitor so that it faces toward or away from you.