Canon VB-M640VE Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB- - Page 110

Timer Triggered Operation Settings [Event] > [Timer] The timer function can generate events that can trigger operations, such as video recording and e-mail notifications, at regular intervals. You can set the following two types of timers. • 24 hours continuous from specified timer • Within specified time only Either type can be set to trigger timer events at regular intervals. Note Timer events are different than [Timer] in [Control for Admin] > [Preset/Initial Setting] > [Preset Setting] > [Auto Control Settings] tab (P. 177). Timer 1 to 4 You can register up to 4 timer events. [Timer Event] Select whether to use a timer event. [24-Hour Continuous Setting] When set to [Enable], the timer event will be repeated at the interval in [Repeat Interval] for 24 hours, starting from the time specified in [Start Time]. When set to [Enable], only [Video Record] operations will be performed. [Start Time] Enter the start time of the timer event in 24-hour format. The timer event will be triggered at the start time. [End Time] When [24-Hour Continuous Setting] is set to [Disable], enter the end time in 24-hour format for repeating the timer event. The timer event will be triggered at the end time. [Repeat Interval] Select a repeat interval for timer events. The timer event will be triggered at the selected intervals. Operation Set the operations to be performed when timer events are triggered. [Start Time Preset] R11 R10 When [24-Hour Continuous Setting] is set to [Disable] and you specify a preset, the camera angle will automatically move to the preset location at the time set in [Start Time]. 110