Canon VB-M640VE Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB- - Page 151

Note • The direction of the arrow will not change even when using Auto Flip (P. 76). • When using Drag to Move, the sliders will not move while the cameras moves. 3 Release the mouse button. The camera will stop.  Operate Camera With Panorama Display Panel You can operate the camera using the frames within the panorama display area. 5 To use a panorama image in the panorama display panel, you must create the image and save it to the camera (P. 201). 1 Click the [Panorama Display] button. Admin Viewer/VB Viewer The panorama display panel appears. 2 Use the frame in the panorama display panel to pan/tilt/zoom the camera. The frame indicates the area being captured by the current camera. Frame Move or Zoom by Dragging Click inside the frame and drag it to pan and tilt the camera. If you click and drag outside the frame, a new frame will be drawn. The camera will pan/tilt/zoom to capture the area in the frame. If you drag an edge of the frame to change its size, the camera will zoom in or out to capture the area in the frame. Move by Clicking If you click outside the frame, the frame will move and center on that point, panning and tilting the camera. Magnify and Display Part of Video (Viewer PTZ) User the Viewer PTZ to magnify part of a video (using digital zoom) without moving the camera. When you do not want to move the camera to pan, tilt or zoom, this still allows you to take advantage of functions, such as the Intelligent Function. Important R11 R10 While using the Viewer PTZ, you cannot operate the camera by clicking or dragging in the video display area. Note • You cannot record the video magnified with the Viewer PTZ. • You can display the magnified video in full screen mode when using the Viewer PTZ. 151