Canon VB-M640VE Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB- - Page 148

 Click on the Video Display Area or Use the Sliders Move by Clicking on the Video Display Area If you click in the video display area, the camera angle will change to center on the mouse pointer location. If the camera angle does not center on the desired location with a single click, repeat the operation. Note While using the Viewer PTZ, clicking on the video display area does not work. Move Using the Sliders Drag the pan and tilt sliders to pan and tilt the camera. Drag the zoom slider to zoom the camera. The slider can also move by clicking directly on the slider bar.. Zoom Slider Drag upward to zoom in (telephoto), drag downward to zoom out (wide-angle). Tilt Slider Move the camera vertically. Pan Slider Move the camera horizontally. Slider When Using Digital Zoom If you set [Camera] > [Camera Settings] > [Camera Control] > [Digital Zoom] to [Enable] on the Setting Page, the digital zoom range will appear on the zoom slider and you will be able to use digital zoom. Note The higher the digital zoom ratio, the lower the video quality. Digital Zoom Maximum Telephoto Digital Zoom Range Optical telephoto end Max. Wide-Angle  Use [Pan/Tilt/Zoom] in Control for Admin You can pan, tilt and zoom the camera with [Control for Admin] > [Pan/Tilt/Zoom]. 148