Canon VB-M640VE Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB- - Page 74
H.264(2), ize], [Bit Rate Control], [Target Bit Rate kbps], [Video Quality], [Frame Rate fps]
View all Canon VB-M640VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
[Video Quality] You can select the video quality if [Bit Rate Control] is set to [Do not use bit rate control]. Greater values have higher quality. [Frame Rate (fps)] Select the video frame rate. [I Frame Interval (sec)] Select the I frame interval (sec) for H.264 video. Important • When [H.264(1)] is used for memory card recording and upload, the following restrictions apply to the [H.264(1)] setting. - [Bit Rate Control]: [Use bit rate control] only - [Target Bit Rate (kbps)]: [3072] or less - [I Frame Interval (sec)]: either [0.5], [1], or [1.5] • The included RM-Lite cannot record H.264 video. H.264(2) Settings for H.264(2) video transmitted from the camera. H.264(2) video can be displayed using Admin Viewer and RM-Lite Viewer. It cannot be used for upload, memory card recording, or by VB Viewer. The video sizes that can be selected depend on the [Video Size Set] setting. [H.264(2)] Select [Enable] to dual stream H.264 video. [Video Size], [Bit Rate Control], [Target Bit Rate (kbps)], [Video Quality], [Frame Rate (fps)], [I Frame Interval (sec)] Please refer to each setting in "H.264(1)". Important • When dual streaming H.264 videos, setting the video size for H.264(1) and H.264(2) to the following combinations restricts the frame rate to a maximum of 15 fps. For all other combinations, a frame rate of up to 30 fps can be selected. H.264(1) 1280 x 960 1280 x 720 H.264(2) 1280 x 960 1280 x 720 • The included RM-Lite cannot record H.264 video. 74