Canon VB-M640VE Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB- - Page 153
Cropping and Displaying Part of an Image (Digital PTZ), Digital PTZ
View all Canon VB-M640VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
• The [Viewer PTZ] button display will change as follows depending on whether or not you are using the Viewer PTZ. You are not using the Viewer PTZ (video being received by the camera appears in the video display area) You are using the Viewer PTZ (magnified video appears in the video display area) Cropping and Displaying Part of an Image (Digital PTZ) M641 M640 M741 M740 You can use the Digital PTZ panel to crop and display part of a camera image in the image display area. It is also possible to use a preset or home position registered to the camera. 5 Digital PTZ Digital PTZ is a function that allows easy panning, tilting, and zooming by transmitting only a part of the camera effective pixel area without moving the camera lens position that was adjusted during camera installation. Note If Digital PTZ is enabled while receiving H.264 video, the received video changes to JPEG format. Admin Viewer/VB Viewer Differences Between Digital PTZ and Viewer PTZ Digital PTZ and Viewer PTZ are both functions allowing easy panning, tilting and zooming using the digital zoom, but they have the following differences because they employ different operating principles. Digital PTZ M641 M640 M741 M740 Transmits only the cropped part of the entire area that can be captured by the camera. The size of the received data is small. Independent operation cannot be performed by each Viewer. If multiple Viewers are connected, the same Digital PTZ display is applied to the other Viewers. Viewer PTZ Enlarges the specified part of the video transmitted from the camera and then displays it in the viewer. The size of the received data is large. PTZ operation can be performed independently for each Viewer. Crop Video With Digital PTZ Panel 1 Click the [Digital PTZ] button. The Digital PTZ panel appears. 2 In the Digital PTZ panel, move and resize the preview frame. The preview frame operations are the same as with the Viewer PTZ (P. 152). The preview frame size can be set to any of 5 sizes. The screen sizes that can be selected change as follows depending on the setting in [Basic Settings] > [Video Settings] > [All Videos] > [Video Size Set] on the Setting Page. • [1280 x 720 / 640 x 360 / 320 x 180] selected: 640x360, 512x288, 384x216, 256x144, 128x72 • [1280 x 960 / 640 x 480 / 320 x 240] selected: 640x480, 512x384, 384x288, 256x192, 128x96 Note The preview frame will move in steps. Fine-tuned movement is not possible. The video of the area inside the manipulated preview frame is magnified to fill the video display area. 153