Canon VB-M640VE Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB- - Page 199

Privacy Mask Registration Area This shows the positions of privacy mask areas in the entire area that can be captured by the camera. R11 R10 M641 M640 M741 M740 (1) (1) (2) (3) (3) (4) (1) Entire Area That Camera Can Capture This shows the area that can physically be captured. 6 R11 R10 Even if a panoramic image is registered on the camera, it will not be displayed here. Admin Tools (2) View Restriction Area R11 R10 Appears if view restrictions have been configured with the View Restriction Setting Tool (P. 206). (3) Privacy Mask Areas Privacy masks selected in [Detailed Settings] [Enable Privacy Mask] (P. 200) are displayed filled with color. Privacy masks not selected are displayed with a crossed out frame. (4) Maximum Wide-Angle Area R11 R10 This is the visible area when the camera is at maximum wide-angle. This is only displayed when a privacy mask area is being dragged.  Change Mask Position and Size 1 Select the privacy mask area you want to change. 2 Change the position and size of the privacy mask area. You can use the mouse to move or resize the preview frame, or change values in [Detailed Settings] (P. 200). Note To discard changes and restore settings saved to the camera, click [Restore settings]. 3 Click [Quick change] or [Save settings]. The changed privacy mask area is saved to the camera. Note Select a disabled privacy mask and click [Quick change] to enable it. 199