Canon VB-M640VE Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB- - Page 198
Change/Delete a Privacy Mask, How to Select a Privacy Mask
View all Canon VB-M640VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Privacy mask registration area Privacy Mask Areas 5 To add privacy mask areas, repeat steps 2 to 5. You can save up to 8 privacy masks. Important • Check privacy mask settings again if you change the [Basic Settings] > [Video Settings] > [All Videos] > [Video Size Set] settings on the Setting Page. • You will need to set the position of the privacy mask again if you change the [Image Flip] setting in [Camera] > [Camera Settings] > [Installation Conditions] on the setting page. • If you reconfigure privacy mask settings after you changed the [Camera] > [Camera Settings] > [Camera Control] > [Image Stabilizer] on the setting page, reconfigure all privacy mask positions and sizes. R11 R10 • After registering a privacy mask, pan, tilt and zoom the camera to confirm the areas you want to mask do not become visible when the camera direction is altered. • Privacy masks may deviate slightly from the specified position depending on the zoom position. • If you change the privacy mask settings after saving a panorama image using the Panorama Creation Tool, you must use the Panorama Creation Tool to recreate the panorama image. Change/Delete a Privacy Mask How to Select a Privacy Mask There are two ways to select a privacy mask area. • Click the privacy mask area you want to change in the privacy mask registration area. • Keep clicking [Next] until you select the privacy mask area you want. Privacy Mask Areas 198