Canon XC15 User Manual - Page 37
Removing a CFast card, Inserting and Removing an SD Card, Pull the CFa
View all Canon XC15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Preparing Recording Media Removing a CFast card 1 Turn off the camcorder. • Wait until the ACCESS indicator is off. 2 Slide the CARD OPEN switch in the direction of the 37 arrow and open the recording media slot cover ቢ. ቢ 3 Push in the CFast card release button to release the CFast card. 4 Pull the CFast card all the way out and close the ACCESS indicator recording media slot cover ባ. ባ IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing in red. Failure to do so may result in permanent data loss. - Do not disconnect the power source or turn off the camcorder. - Do not open the recording media slot cover. Inserting and Removing an SD Card 1 Turn off the camcorder. • Wait until the ACCESS indicator is off. 2 Slide the CARD OPEN switch in the direction of the arrow and open the recording media slot cover ቢ. 3 Insert the SD card, with the label facing up, all the way into the SD card slot until it clicks ባ. • To remove the SD card, push the SD card once to release it. When the SD card springs out, pull it all the way out. 4 Close the recording media slot cover ቤ. • Do not force the cover closed if the SD card is not correctly inserted. ACCESS indicator On or flashing Off Recording media status Accessing the recording media. A recording media is not inserted or it is not being accessed. ቢ ቤ ACCESS indicator ባ IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing in red. Failure to do so may result in permanent data loss. - Do not disconnect the power source or turn off the camcorder. - Do not open the recording media slot cover. • SD cards have front and back sides that are not interchangeable. Inserting an SD card facing the wrong direction can cause a malfunction of the camcorder. Be sure to insert the SD card as described in the procedure above. NOTES • SD cards have a physical switch to prevent writing on the card so as to avoid the accidental erasure of the card's content. To write-protect the SD card, set the switch to the LOCK position. Table of Contents Menus Index