Canon XC15 User Manual - Page 97
Pre-recording Mode, On] to turn on pre-recording mode and then touch
View all Canon XC15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Pre-recording Mode Pre-recording Mode When pre-recording mode is activated, the camcorder starts recording continuously into a temporary memory of approximately 5 seconds so when you press the START/STOP button, the clip will contain also approximately 5 seconds of video and audio recorded before you pressed the button. Pre-recording is available only for HD 97 clips. Operating modes: 1 Touch [FUNC.] and then touch [Pre REC]. 2 Touch [ On] to turn on pre-recording mode and then touch [X]. • appears on the upper right of the screen. • Touch [ Off] to turn off pre-recording mode. 3 Press the START/STOP button to begin recording. • The tally lamp illuminates. 4 Press the START/STOP button again to stop recording. • The camcorder records the clip, including approximately 5 seconds of video and audio recorded before the START/STOP button was pressed. • The tally lamp goes out. NOTES • During pre-recording mode, the time code's running mode (A 84) will be set to [Free Run], regardless of the previous setting. When the time code is recorded, it will include the 5 seconds before the START/STOP button was pressed. When pre-recording mode is deactivated, the running mode will return to its previous setting. • Pre-recording cannot be used together with slow & fast motion recording. • Pre-recording will be deactivated if you open the setup menus or change the look setting (A 65). Table of Contents Menus Index