Canon XC15 User Manual - Page 88
Using the MIC Terminal/Built-in Microphone while the Microphone Adapter is Attached
View all Canon XC15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Recording Audio Using the MIC Terminal/Built-in Microphone while the Microphone Adapter is Attached To use an external microphone connected to the MIC terminal or use the 88 built-in microphone while the supplied microphone adapter is attached to the camcorder, follow the procedure below to deactivate the INPUT terminals. 1 Press the MENU button. 2 Open the [INPUT 1/2] submenu. [¡ Audio Setup] > [1] > [INPUT 1/2] 3 Select [ Off] and then touch [X]. • will appear on the bottom right of the screen. • Select [ On] to reactivate the INPUT terminals. [¡ Audio Setup] [1] [INPUT 1/2] [ On] Using the INPUT 1/INPUT 2 Terminals When the supplied microphone adapter is attached to the camcorder, you can use the INPUT terminals to record audio independently to two audio channels from a microphone or analog audio input source. To select the audio source, set the INPUT 1 or INPUT 2 switch to LINE or MIC as necessary. • To supply a microphone with phantom power, set the switch to MIC+48V instead. Make sure to connect the microphone first, before turning the phantom power on. Keep the microphone connected when turning off the phantom power. • When using the INPUT terminals to record to only one channel, use the INPUT 1 terminal. INPUT 1/ INPUT 2 switches IMPORTANT • When connecting a microphone or device that does not support phantom power, make sure to set the corresponding INPUT switch to MIC or LINE, respectively. If you set the switch to MIC+48V, the microphone or device may be damaged. Table of Contents Menus Index