Canon XC15 User Manual - Page 76

Adjusting the Focus Manual Focus (MF) You can adjust the focus using the focus ring on the lens, through the FUNC. menu, or remotely with the Browser Remote application. 76 Operating modes: Using the Focus Ring 1 Set the FOCUS switch to M. • MF appears on the left side of the screen. 2 Turn the focus ring on the lens to adjust the focus. • The focusing speed will depend on how fast you turn the ring. NOTES • You can change the direction of the adjustment and the sensitivity of the response of the focus ring using the [v Camera Setup] > [2] > [Focus Ring Direction] and [Focus Ring Response] settings. Using the FUNC. Menu When the camcorder is in mode, you must first add [< Focus] to the right side of the FUNC. menu before adjusting the focus. If you have already done so or the camcorder is in mode, start from the second procedure, To Adjust the Focus. Preparation Operating modes: 1 Set the FOCUS switch to M. • MF appears on the left side of the screen. 2 Press the MENU button. 3 Open the [v Customize Menu] screen. [ System Setup] > [2] > [v Customize Menu] 4 From the right side of the screen, select the function to remove from the right side of the FUNC. menu. 5 From the bottom of the screen, select [< Focus]. 6 Touch [X]. [ System Setup] [2] [v Customize Menu] To adjust the focus Operating modes: 1 Touch [FUNC.] and then touch < [Focus]. 2 Touch a subject that appears inside the white frame. • The I mark will flash on the selected subject or area and the camcorder will automatically focus where the mark is. After that, the camcorder will return to MF mode. Table of Contents Menus Index