Canon XL2 XL2 Instruction Manual - Page 113
Troubleshooting
View all Canon XL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. E Power Source Problem Cause Solution Camcorder will not turn on. Battery pack is not correctly Attach the battery pack 13 attached. correctly. The camcorder switches off Power save function has been Turn on the camcorder. 32 by itself. activated. Viewfinder switches on and Battery pack is exhausted. off. Replace or charge the battery 13 pack. Recording/Playback Buttons will not work. "h" flashes on the screen. "REMOVE THE CASSETTE" appears on the screen. The wireless controller will not work. Cassette is not loaded. Condensation is detected. Camcorder stopped operating to protect the tape. Camcorder and wireless controller are not set to the same remote sensor mode. Batteries of the wireless controller are exhausted. Load a cassette. 25 See reference page. 110 Unload and reload the cassette. 25 Change the remote sensor 95 modes. Replace the batteries. 24 Recording Image will not appear on The POWER dial is not set to a Set the POWER dial to a 32 the screen. recording program. recording program. "SET THE TIME ZONE, DATE Time zone, date and time are Set the time zone, date and 30 AND TIME" appears on the not set, or the backup battery is time, or replace the backup screen. exhausted. battery and reset the date and time. Pressing the start/stop Cassette is not loaded. Load a cassette. 25 button will not start The POWER dial is not set to a Set the POWER dial to a 32 recording. recording program. recording program. The lock lever on the carrying Slide the lock lever to the left 33 handle is activated. and deactivate it. Camcorder will not focus. Autofocus does not work on Focus manually. 41 that subject. Viewfinder is not adjusted. Adjust the viewfinder with the 19 dioptric adjustment lever. Lens is dirty. Clean the lens. 108 The tally lamp will not light [TALLY LAMP] is set to [OFF] in Set [TALLY LAMP] to [ON]. 83 up. the menu. Additional Information 113