Canon XL2 XL2 Instruction Manual - Page 51
Recording on Channels 1 and 2
View all Canon XL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Recording on Channels 1 and 2 Select the audio input from FRONT MIC (supplied microphone unit), AUDIO1 (RCA terminals) or REAR E (XLR terminals). Refer also to the audio block diagram ( 122). Recording When Using the Front Microphone Set the INPUT SELECT switch to FRONT MIC. Turn on the microphone attenuator (20 dB) as necessary by setting the FRONT MIC ATT. switch to ATT. When Connecting to the RCA terminals of AUDIO1 (Line-in Recording) 1. Connect the device to the RCA terminals of AUDIO1. 2. Set the INPUT SELECT switch to AUDIO1. When Connecting to the XLR terminals 1. Connect a microphone to the XLR terminals. To supply a microphone with phantom power, set the +48V switch to ON. Make sure to connect the microphone first, before turning on the phantom power. Keep the microphone connected when turning off the phantom power. 2. Set the INPUT SELECT switch to REAR. 3. Set the REC CH SELECT switch to CH1 or CH1·CH2. Input terminal CH1/3 CH2/4 Position of the REC CH SELECT switch CH1 CH1·CH2 CH1 CH1·CH2 Recorded channel Channel 1 Channel 1+Channel 2 Channel 2 - - - 4. Turn on the microphone attenuator (20 dB) as necessary by setting the MIC ATT. switch to ATT. 5. For 12dB gain-up: Open the menu and select [AUDIO SETUP]. Select [R-XLR GAINUP], set it to [12dB] and close the menu. 51