Dell 1250C User's Guide - Page 153
Auger mark, Adjust, Altitude, Printer Maintenance, Status, Developer Stir Mode, Diagnosis, Start
View all Dell 1250C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Action 1 If the printer is installed in a high altitude location, set the altitude of the location. 1 Launch the Tool Box, and click Adjust Altitude on the Printer Maintenance tab. 2 Select the value close to the altitude of the location where the printer is installed. Is them problem recovered? Auger mark Yes The task is complete. No Contact Dell. Action 1 The toner cartridges may be low or need to be replaced. Confirm the amount of toner in each toner cartridge. 1 Check the toner level in the Status tab in the Status Monitor. 2 Replace the toner cartridges as necessary. Is the problem recovered? 2 Start Developer Stir Mode. 1 Launch the Tool Box, click Developer Stir Mode on the Diagnosis tab. 2 Click the Start button. Is the problem recovered? Yes The task is complete. The task is complete. No Go to action 2. Contact Dell. Troubleshooting 151