Dell C1760NW Color Laser Printer User Guide - Page 131

WPS Setup, Reset Wireless, TCP/IP, Print PIN Code

Page 131 highlights

WPS Setup Purpose: To configure the wireless network using WPS. Values: Push Btn. Ctrl PBC Start*1 Configures the wireless setting with the security method of WPS-PBC. PIN Code Start Config. Configures the wireless setting using the PIN code assigned automatically by the printer. Print PIN Code Prints the PIN code. Confirm it when you enter the PIN code to your computer. *1 You can also start WPS-PBC by pressing and holding the (Wi-Fi | WPS) button. NOTE: WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK, WPA-PSK AES, WPA2-PSK AES, WPA-PSK TKIP, Open (No Security) NOTE: For Dell C1760nw Color Printer, this item is displayed when the Ethernet cable is disconnected and Wireless LAN is set to Enable. NOTE: For Dell C1660w Color Printer, this item is displayed only when Wireless LAN is set to Enable. Reset Wireless Purpose: To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network settings are reset to their default values. NOTE: For Dell C1760nw Color Printer, this item is displayed when the Ethernet cable is disconnected and Wireless LAN is set to Enable. NOTE: For Dell C1660w Color Printer, this item is displayed only when Wireless LAN is set to Enable. TCP/IP Purpose: To configure TCP/IP settings. The change takes effect after the printer is turned off and then on. Values: IP Mode IPv4 Dual Stack* IPv4 Mode IPv6 Mode Get IP Address AutoIP* BOOTP RARP DHCP Panel IP Address Subnet Mask Gateway Address Uses both IPv4 and IPv6 to set the IP address. Uses IPv4 to set the IP address. Uses IPv6 to set the IP address. Automatically sets the IP address. Uses BOOTP to set the IP address. Uses RARP to set the IP address. Uses DHCP to set the IP address. Enables the IP address entered on the operator panel. Manually sets the IP address allocated to the printer. Manually sets the subnet mask. Manually sets the gateway address. Understanding the Printer Menus 129

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240

Understanding the Printer Menus
129
WPS Setup
Purpose:
To configure the wireless network using WPS.
Values:
NOTE:
WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK, WPA-PSK
AES, WPA2-PSK AES, WPA-PSK TKIP, Open (No Security)
NOTE:
For Dell C1760nw Color Printer, this item is displayed when the Ethernet cable is disconnected and
Wireless LAN
is
set to
Enable
.
NOTE:
For Dell C1660w Color Printer, this item is displayed only when
Wireless LAN
is set to
Enable
.
Reset Wireless
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network
settings are reset to their default values.
NOTE:
For Dell C1760nw Color Printer, this item is displayed when the Ethernet cable is disconnected and
Wireless LAN
is
set to
Enable
.
NOTE:
For Dell C1660w Color Printer, this item is displayed only when
Wireless LAN
is set to
Enable
.
TCP/IP
Purpose:
To configure TCP/IP settings.
The change takes effect after the printer is turned off and then on.
Values:
Push Btn. Ctrl
PBC Start
*1
Configures the wireless setting with the security method of WPS-PBC.
PIN Code
Start Config.
Configures the wireless setting using the PIN code assigned automatically
by the printer.
Print PIN Code
Prints the PIN code. Confirm it when you enter the PIN code to your
computer.
*1
You can also start
WPS-PBC by pressing and holding the
(Wi-Fi | WPS)
button.
IP Mode
Dual Stack*
Uses both IPv4 and IPv6 to set the IP address.
IPv4 Mode
Uses IPv4 to set the IP address.
IPv6 Mode
Uses IPv6 to set the IP address.
IPv4
Get IP Address
AutoIP*
Automatically sets the IP address.
BOOTP
Uses BOOTP to set the IP address.
RARP
Uses RARP to set the IP address.
DHCP
Uses DHCP to set the IP address.
Panel
Enables the IP address entered on the operator panel.
IP Address
Manually sets the IP address allocated to the printer.
Subnet Mask
Manually sets the subnet mask.
Gateway Address
Manually sets the gateway address.