Dell C1760NW Color Laser Printer User Guide - Page 133
USB Settings, System Settings, USB Port, PowerSaver Time
View all Dell C1760NW Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
USB Settings Use the USB Settings menu to change printer settings affecting a USB port. NOTE: Values marked by an asterisk (*) are the factory default menu settings. USB Port Purpose: To change the USB settings on your printer. The change takes effect after the printer is turned off and then on. Values: Enable* Disable Enables the USB interface. Disables the USB interface. System Settings Use the System Settings menu to configure a variety of printer features. NOTE: Values marked by an asterisk (*) are the factory default menu settings. PowerSaver Time Purpose: To specify the time for transition to power saver mode. Values: Sleep 5min.* Available Range: 5-30min. Specifies the time taken by the printer before it enters Sleep mode after it finishes a job. Deep Sleep Auto-Off Timer*1 6min.* Available Range: 1-6min. Off On* 180min.* Available Range: 60-1440min. Specifies the time taken by the printer before it enters Deep Sleep mode after it goes into Sleep mode. Disables the Auto-Off Timer. Specifies the time it takes to automatically turn off the printer after it has entered Deep Sleep mode. *1 Auto-Off Timer feature is available only in certain regions. Enter 5 in Sleep to put the printer in the Sleep mode five minutes after it finishes a job. This uses less energy, but requires more warm-up time for the printer. Enter 5 if your printer shares an electrical circuit with room lighting and you notice lights flickering. Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum warm-up time. Select a value between 5 and 30 minutes for the Sleep mode if you want a balance between energy consumption and a shorter warm-up period. The printer automatically returns to the standby mode from the Sleep mode when it receives data from the computer. You can also return the printer to the standby mode by pressing any button on the operator panel. If the Auto-Off Timer feature turns off the printer, the printer cannot be turned back on automatically. To turn the printer back on, physically turn the power switch of the printer to On. Understanding the Printer Menus 131