Dell Latitude E5500 Service Manual - Page 27

6. Remove the display inverter (see Removing the E5500 Display Inverter). 7. Remove the eight M2 x 3-mm screws (four on each side of the display panel) from the display hinge panels. 1 M2 x 3-mm screws (8) (on display hinge panels) 2 display panel 3 top cover 8. Lift the display panel from the top cover. Replacing the E5500 Display Panel CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. NOTE: This procedure assumes that you have completed the removal procedure first. 1. Replace the eight M2 x 3-mm screws (four on each side of the display panel) to secure the display panel to the display hinge panels. 2. Replace the display inverter (see Replacing the E5500 Display Inverter). 3. Replace the display bezel (see Replacing the E5500 Display Bezel). 4. Replace the display assembly (see Replacing the E5500 Display Assembly). 5. Replace the keyboard (see Replacing the Keyboard). 6. Replace the hinge cover (see Replacing the Hinge Cover). 7. Close the display and turn the computer over. 8. Replace the bottom of the base assembly (see Replacing the E5500 Bottom of the Base Assembly). 9. Follow the procedures in After Working on Your Computer. E5500 Display Cable Removing the E5500 Display Cable CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. 1. Follow the instructions in Before Working on Your Computer. 2. Remove the hinge cover (see Removing the Hinge Cover). 3. Remove the keyboard (see Removing the Keyboard). 4. Remove the display assembly (see Removing the E5500 Display Assembly).