Dell OptiPlex 320 User Guide - Page 72
DDR2 Memory Overview, Addressing Memory With 4-GB Configurations 32-bit Operating Systems Only - download
UPC - 683728237738
View all Dell OptiPlex 320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Back to Contents Page Memory Dell™ OptiPlex™ 320 User's Guide DDR2 Memory Overview Addressing Memory With 4-GB Configurations (32-bit Operating Systems Only) Removing Memory Installing Memory For information on the type of memory supported by your computer, see the "Memory" section of the specifications for your computer: l Mini Tower Computer Specifications l Desktop Computer Specifications NOTICE: Before you install new memory modules, download the most recent BIOS for your computer from the Dell Support website at support.dell.com. DDR2 Memory Overview NOTICE: Do not install ECC memory modules. Doing so may cause the system not to boot or affect performance. If the DDR2 memory modules are not installed with the same amount of memory in each channel, the computer will continue to operate, but with a slight reduction in performance. See the label in the corner of the module to determine the module's capacity. NOTE: Always install DDR2 memory modules in the order indicated on the system board. Be sure to install a single memory module in DIMM1, the connector closer to the processor, before you install a module in the other connector. The recommended memory configurations are: l A pair of matched memory modules installed in connectors DIMM1 and DIMM2 or l A memory module installed in connector DIMM1 Addressing Memory With 4-GB Configurations (32-bit Operating Systems Only) This computer supports a maximum of 4 GB of memory when you use two 2-GB DIMMs. Current 32-bit operating systems, such as Microsoft® Windows® XP, can use a maximum of 4 GB of address space; however, the amount of memory available to the operating system is less than that installed. Certain components within the computer require address space in the 4-GB range. Any address space reserved for these components cannot be used by computer memory. NOTE: If you use a 64-bit operating system, the entire memory range is available to the operating system. The following components require memory address space: l System ROM l APICs l Integrated PCI devices, such as network connectors l PCI cards l Graphics cards l PCI Express cards (if applicable) At start-up, the BIOS identifies the components that require address space. The BIOS dynamically calculates the amount of reserved address space required. The BIOS then subtracts the reserved address space from 4 GB to determine the amount of usable space. l If the total installed computer memory is less than the usable space, all installed computer memory is only available for use by the operating system. l If the total installed computer memory is equal to or greater than the usable address space, a portion of installed memory is not available for use by