Dell OptiPlex 7090 Small Form Factor Service Manual - Page 10
Removing and installing components, Recommended tools, Screw List
View all Dell OptiPlex 7090 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 Removing and installing components NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips #0 screwdriver ● Phillips #1 screwdriver ● Plastic scribe-Recommended for field technician Screw List The following table shows the screw list and the images for different components. Table 1. Screw list Component Screw type Quantity M.2 2230/2280 solid-state drive M2x3 1 Image SD-card reader M3x5 2 WLAN card Fan and heatsink assembly M2x3 1 Captive screws 4 Power-supply unit System board 6x32 3 #6-32 4 10 Removing and installing components
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
●
Phillips #0 screwdriver
●
Phillips #1 screwdriver
●
Plastic scribe-Recommended for field technician
Screw List
The following table shows the screw list and the images for different components.
Table 1. Screw list
Component
Screw type
Quantity
Image
M.2 2230/2280 solid-state drive
M2x3
1
SD-card reader
M3x5
2
WLAN card
M2x3
1
Fan and heatsink assembly
Captive screws
4
Power-supply unit
6x32
3
System board
#6-32
4
2
10
Removing and installing components