Dell OptiPlex 7090 Small Form Factor Service Manual - Page 73
Storage, Table 16. Integrated Devices continued, Table 17. Storage
View all Dell OptiPlex 7090 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Table 16. Integrated Devices (continued) Options Rear USB Configuration Dust Filter Maintenance Storage This section provides storage details and settings. Table 17. Storage Options SATA Operation SATA Operation Storage Interface Port Enablement SMART Reporting Description ● Front Port 3 (Top Left) ● Front Port 4 (Top Right) This section allows the user to manually enable the 4 USB ports on the back (All USB ports are enabled by default.). The options are: ● Rear Port 1 (Top Left) ● Rear Port 2 (Left Middle) ● Rear Port 3 (Bottom Left) ● Rear Port 4 (Bottom Right) ● Rear Port 4 (Middle Right) ● Rear Port 4 (Top Right) This field enabled or disabled BIOS messages for maintaining the optional dust filter. BIOS will generate a pre-boot reminder to clean or replace the dust filter based on the following time intervals: ● Disabled (selected by default) ● 15 days ● 30 days ● 60 days ● 90 days ● 120 days ● 150 days ● 180 days Description This section allows the user to select the operating mode of the integrated SATA hard drive controller. The following options are available: ● Disabled - SATA controllers are disabled. ● AHCI - SATA is configured in AHCI mode. ● RAID On - SATA is setup to support RAID (Intel Rapid Storage Technology). (Selected by default) This section allows the user to enable or disable the onboard drives on the computer. The following options is available (ON by default). ● SATA-0 ● SATA-1 ● SATA-3 ● M.2 PCIe SSD-0 ● M.2 PCIe SSD-1 System setup 73