Dell OptiPlex 7090 Small Form Factor Service Manual - Page 25
Removing the M.2 2280 solid-state drive
View all Dell OptiPlex 7090 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Steps 1. Align the solid-state drive with the socket on the system board and slide it in. 2. Replace the single (M2X3) screw that secures the M.2 solid-state drive to the system board. Next steps 1. Install the 2.5/3.5-inch hard-drive caddy. 2. Install the front bezel. 3. Install the side cover. 4. Follow the procedure in after working inside your computer. Removing the M.2 2280 solid-state drive Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the front bezel. 4. Remove the 2.5/3.5-inch hard-drive caddy. About this task The following images indicate the location of the M.2 2280 solid-state drive and provide a visual representation of the removal procedure. Removing and installing components 25