Dell OptiPlex 7090 Small Form Factor Service Manual - Page 39
Graphics card, Removing the graphics card
View all Dell OptiPlex 7090 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Steps 1. Place the fan and heat-sink assembly onto the system board. 2. Tighten the captive screws that secure the fan and heat-sink assembly to the system board. 3. Connect the fan cable to the connector on the system board. Next steps 1. Install the front bezel. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Graphics card Removing the graphics card Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. About this task The following images indicate the location of the graphics card and provide a visual representation of the removal procedure. Removing and installing components 39
Steps
1.
Place the fan and heat-sink assembly onto the system board.
2.
Tighten the captive screws that secure the fan and heat-sink assembly to the system board.
3.
Connect the fan cable to the connector on the system board.
Next steps
1.
Install the
front bezel
.
2.
Install the
side cover
.
3.
Follow the procedure in
after working inside your computer
.
Graphics card
Removing the graphics card
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
About this task
The following images indicate the location of the graphics card and provide a visual representation of the removal procedure.
Removing and installing components
39