Dell OptiPlex 7090 Small Form Factor Service Manual - Page 20
Removing the 2.5-inch hard-drive
View all Dell OptiPlex 7090 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Steps 1. Disconnect the hard-drive data and power cables from the connectors on the hard drive and push the left tab towards the hard-drive to free the caddy from the chassis 2. Release the hard-drive caddy from the tabs on the right side and slide the hard-drive caddy out. NOTE: The hard-drive's power and data cables can only connected from the bottom side of the caddy. Make a note of the orientation of the hard drive to avoid errors during installation. Removing the 2.5-inch hard-drive Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the front bezel. 4. Remove the 2.5/3.5-inch hard-drive caddy. About this task The following images indicate the location of the hard drive and provide a visual representation of the removal procedure. NOTE: The hard-drive caddy can hold both 2.5-inch and 3.5-inch hard drives simultaneously. Turn over the caddy to find the second set of mounting points for hard-drives. 20 Removing and installing components