Dell Precision M65 User's Guide - Page 56
Returning a Hard Drive to Dell, Removing the Device Security Screw
View all Dell Precision M65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector. 5. Slide the new hard drive into the bay and into the connector until it is fully seated. 6. Replace the screws. 7. Install the operating system for your computer (see Restoring Your Operating System). 8. Install the drivers and utilities for your computer (see Reinstalling Drivers and Utilities). Returning a Hard Drive to Dell Return your old hard drive to Dell in its original or comparable foam packaging. Otherwise, the hard drive may be damaged in transit. 1 foam packaging 2 hard drive Media Bay NOTE: If the device security screw is not present, you can remove and install devices while the computer is running and connected to a docking device (docked). Removing the Device Security Screw If present, you must remove the device security screw before you remove the device: 1. Save and close any open files, exit any open programs, and shut down the computer. 2. If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions. 3. Close the display and turn the computer upside-down. 4. Use a #1 Phillips screwdriver to remove the device security screw from the bottom of the computer. 1 device security screw 2 device latch release