Dell Precision M65 User's Guide - Page 58
Keyboard, Memory
View all Dell Precision M65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
1 hinge cover 2 indent 4. Ease the hinge cover up, moving from right to left, and remove it. 5. To replace the hinge cover, insert the left edge of the cover into the hinge cover slot, and press from left to right until the cover snaps into place. Keyboard CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). 1. Follow the procedures in Before You Begin. 2. Remove the hinge cover (see Hinge Cover). 3. Remove the three screws at the top of the keyboard. NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard. 4. Rotate the keyboard forward and lay it on the palm rest to allow access to the keyboard connector on the system board. 5. Pull up on the pull-tab to disconnect the keyboard cable connector from the keyboard connector on the system board. 1 keyboard 4 keyboard connector 2 keyboard screws 3 cable connector NOTICE: To avoid scratching the palm rest when replacing the keyboard, hook the tabs along the front edge of the keyboard into the palm rest, and then secure the keyboard in place. 6. To replace the keyboard, connect the keyboard connector to the system board. 7. Place the tabs along the front edge of the keyboard into the palm rest and lay the keyboard down on the palmrest. 8. Replace the three screws at the top of the keyboard. 9. Replace the hinge cover. Memory