Denon S-5BD Owners Manual - English - Page 17
Connecting a TV
UPC - 083795001216
View all Denon S-5BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Getting Started Simple Version Connections Playback (Basic) ENGLISH Connecting an HDMI-Compatible Device Required Settings for HDMI Connection Settings can only be made when the input source is "BD/SD". Set as necessary. For details, see the respective reference pages. n Make the Video Output Signal Setting for the Connected Television "Video Setup" (vpage 44) n About HDMI Video Resolution Setting • Change the HDMI video resolution by pressing RESOLUTION. Switch the output mode as follows. (Default settings are underlined.) Rear Auto 480/576i (480/576 interlaced) 480/576P (480/576 progressive) Source Direct 1080P (1080 progressive) 1080i (1080 interlaced) • If the HDMI resolution is not set to "Auto", set it to correspond with the resolution of your television. NOTE When ZONE2 is powered on, the HDMI video resolution in the MAIN ZONE switches automatically according to the input signal. When this happens, it is not possible to switch to a different video resolution, even by pressing RESOLUTION. (See page 41 for information on ZONE2). Connecting a TV • You can listen to TV audio only. • Select the terminal to use and connect the device. • For instructions on HDMI connections, see "Connecting an HDMI-Compatible Device" on page 12. This connection is not required when a TV compatible with the ARC function (Audio Return Channel (HDMI1.4 standard function)) is connected to this unit via an HDMI connection. For details, see "About ARC (Audio Return Channel) Function" (vpage 12) or refer to the instruction manual for your TV. n Cables Used for Connections Audio cables (sold separately) Audio cable (White) L L (Red) R R Coaxial digital cable Optical cable (Orange) TV $0"9*"065 "6%*0 "6%*0 065 -3 015*$"065 LR LR Settings Playback (Advanced) Multizone GUI Remote Control Part Names Other Information Troubleshooting Spec. Index When using a coaxial digital cable for the digital audio connection, set "Manual Setup" - "Audio Setup" - "COAX Input Assign" on the GUI menu (vpage 56) to "AUX2". 13