Denon S-5BD Owners Manual - English - Page 58

Getting Started Simple Version Connections Playback (Basic) Settings ENGLISH Manual Setup Setting items Speaker Configuration (Continued) Bass Setting Set subwoofer and LFE signal range playback. Setting details Surround Back : Set the presence, size and number of surround back speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround back speakers are not connected. • 2spkrs : Use two surround back speakers. • 1spkr : Use only one surround back speaker. When you select this setting, connect the surround back speaker to the left (L) channel. Even when the "Surround Back" setting is other than "None", sound may not be emitted from the surround back speaker, depending on the playback source. In this case, make "Surround Parameters" - "Surround Back" setting other than "OFF" (vpage 50). NOTE When the "Speaker Assign" setting (vpage 53) is other than "5.1CH + Surround Back", you cannot make the "Surround Back" setting. Front Height : Set the presence and size of the front height speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the front height speakers are not connected. NOTE When the "Speaker Assign" setting (vpage 53) is other than "5.1CH + Front Height", you cannot make the "Front Height" setting. Subwoofer Mode : Select low range signals to be reproduced by subwoofer. • LFE : The low range signal of the channel set to "Small" speaker size is added to the LFE signal output from the subwoofer. • LFE+Main : The low range signal of all channels is added to the LFE signal output from the subwoofer. • This item can be set when "Speaker Configuration" - "Subwoofer" (vpage 53) is set to "Yes". • Play music or a movie source and select the mode offering the strongest bass. • Select "LFE+Main" if you want the bass signals to always be produced from the subwoofer. Setting items Bass Setting (Continued) Distance Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. Setting details LPF for LFE : Set LFE signal playback range. • 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz "LPF for LFE" can be set when "Speaker Configuration" - "Subwoofer" (vpage 53) is set to "Yes". Feet / Meters : Set the unit of distance. Step : Set the minimum variable width of the distance. • 1ft / 0.1ft • 0.1m / 0.01m Default : Reset all distance settings to factory default. • Yes • No When you select "Default" and press ENTER, the "Return all settings to the default?" prompt is displayed. Select either "Yes" or "No", and press ENTER. Front L / Front R / Center / Subwoofer / Surround L / Surround R / Surround Back Lz / Surround Back Rz / Front Height L / Front Height R : Select the speaker. z When the "Speaker Configuration" - "Surround Back" setting (vpage 54) is set to "1spkr", "Surround Back" is displayed. • 0.0ft - 60.0ft / 0.00m - 18.00m : Set the distance. • The speakers that can be selected differ depending on the "Speaker Assign" (vpage 53) and "Speaker Configuration" (vpage 53, 54) settings. • Default settings : Front/Center/Subwoofer/Front Height : 12.0 ft (3.60 m) Surround/Surround Back : 10.0 ft (3.00 m) • Set the difference in the distance between the speakers to less than 20 feet (6.0 meters). NOTE Speakers set to "None" in "Speaker Configuration" (vpage 53, 54) are not displayed. Playback (Advanced) Multizone GUI Remote Control Part Names Other Information Troubleshooting Spec. Index 54 Remote control operation buttons Display the menu Cancel the menu Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu