Denon S-5BD Owners Manual - English - Page 31

Getting Started Simple Version Connections Playback (Basic) Settings Playback (Advanced) ENGLISH Tuning in Radio Stations Listening to FM/AM Broadcasts 1 Press TUNER to select "FM" or "AM". FM When listening to an FM broadcast. AM When listening to an AM broadcast. 2 Tune in the desired broadcast station. q To tune in automatically (Auto Tuning) Press MODE to light the "AUTO" indicator on the display, then use TU d or TU f to select the station you want to hear. • To cancel Auto tuning, press TU d or TU f. w To tune in manually (Manual Tuning) Press MODE to turn off the display's "AUTO" indicator, then use TU d or TU f to select the station you want to hear. n Adjusting the Master Volume (vpage 28) Press VOL df. Front • If the desired station cannot be tuned in with auto tuning, tune it in manually. • When tuning in stations manually, press and hold TU d or TU f to change frequencies continuously. Presetting Radio Stations (Manual Preset) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. Multicasts can also be preset. • Stations can be preset automatically at "Auto Preset" (vpage 48). If "Auto Preset" is performed after performing "Manual Preset", the "Manual Preset" settings will be overwritten. 1 Tune in the broadcast station you want to preset. Front 2 Press MEMO. 3 Press SHIFT to select the block (A to G) in which the channel (1 to 8 per a block) is to be preset, then press CHANNEL +, - or 1 - 8 to select the preset number. 4 Press MEMO again to complete the setting. Rear To preset other stations, repeat steps 1 to 4. n Default Settings Block (A - G) and Channel (1 - 8) A1 - A8 B1 - B8 C1 - C8 D1 - D8 E1 - E8 F1 - F8 G1 - G8 Default Settings 87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 MHz 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz, 90.1 / 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz Listening to Preset Stations 1 Press SHIFT to select the memory block. 2 Press CHANNEL +, - or 1 - 8 to select the desired preset channel. You can also operate via the main unit. In this case, perform the following operations. Press PRESET + or PRESET - to select the preset radio station. Direct Frequency Tuning You can enter the receiving frequency directly to tune in. 1 Press SEARCH. 2 Input frequencies using 0 - 9. • If o is pressed, the immediately preceding input is cancelled. 3 When setting is completed, press ENTER. The preset frequency is tuned in. Front Rear Rear n Specify a Name for the Preset Broadcast Station (Preset Name) (vpage 48) Multizone GUI Remote Control Part Names Other Information Troubleshooting Spec. Index 27