Epson 6100i User's Guide - Page 34

Adjusting the Image Once you see your image, you need to make certain adjustments: ■ To focus or zoom your image, see below. ■ If the image is too high or too low, you can reposition it. See page 35. ■ If the image isn't square, see page 36. ■ If a computer image displays incorrectly, see page 38. If you need to fine-tune the image and/or sound, see Chapter 4. Focusing and Zooming Your Image Open the lens access door, then do the following: ■ Use the Focus ring on the projector to sharpen the image. ■ Use the Zoom ring on the projector to reduce or enlarge the image. Move the tab toward the W to increase the size, and toward the T to decrease it. Focus ring Zoom ring 34 Projecting If the image still isn't large enough, you may need to move the projector farther away from the screen. You can also use the E-Zoom buttons on the remote control to zoom in on a portion of the image. See page 45 for instructions.