Epson 6100i User's Guide - Page 99
Checking Projector Status, What To Do When the Lights Flash
UPC - 010343858176
View all Epson 6100i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
If none of the suggestions solves your problem, see additional solutions to problems in the following sections. Checking Projector Status If your projector isn't working correctly, first turn it off, wait for it to cool (the P Power light stops flashing orange), and unplug it. Then plug the power cord back in and turn on the projector. If this doesn't solve the problem, check the lights on top of the projector. What To Do When the Lights Flash The lights on top of the projector indicate the projector's status and let you know when a problem occurs. Power light Lamp light Temperature light Filter light Refer to the following table for a complete description of the projector's status lights and their meaning: Light Status orange flashing green Description The projector is in sleep mode. You can unplug it or press the Power button to turn it on. The projector is warming up. Wait for the image to appear. green The projector is operating normally. red flashing orange High Temperature Warning. Although this is not an abnormal condition, projection will stop automatically if the temperature rises too high again. Make sure there is plenty of space around and under the projector for ventilation, and that the air filter is clean. Solving Problems 99