Epson 6100i User's Guide - Page 91
Cleaning the Air Filter, Replacing the Air Filter
UPC - 010343858176
View all Epson 6100i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Cleaning the Air Filter Clean the air filter when you see any of the following messages: The air filter is clogged. Clean or replace the air filter. or Check or Replace the air filter. If it is not cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. Follow these steps: 1. Turn off the projector and unplug the power cord. 2. Gently turn the projector over and push down on the tabs while opening the air filter cover. Then use a vacuum cleaner to clean the filter. note If the air filter has been stained by tobacco smoke, it cannot be cleaned. Replace the filter as described below. 3. When you have finished cleaning the air filter, close the cover and reset the timer as described on page 92. 4. If the dirt is difficult to remove or a filter is broken, replace the filter as described below. Replacing the Air Filter Replace the air filter when you see the Check or Replace the air filter message. If it is not replaced, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. To obtain a replacement air filter, contact your dealer or call Epson at (800) 873-7766 in the United States to obtain a new one. In Canada, please call (800) 463-7766 for dealer referral. Maintaining the Projector 91