Epson EX51 User's Guide - Page 35
Connecting a Component Video Source, Y/Cb/Cr or Y/Pb/Pr connectors on your player.
UPC - 010343874145
View all Epson EX51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Connecting a Component Video Source If your video equipment has component video connectors (three connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a component-to-VGA video cable from Epson (see page 16) or an electronics dealer. 1. Connect the component end of the cable (3 male RCA) to the Y/Cb/Cr (or Y/Pb/Pr) connectors on your player. 2. Connect the other end of the cable (HD15 male) to the Computer (Component Video) port on your projector using an optional component-to-VGA video cable or adapter. EX31 Computer (Component Video) port EX51/EX71 Computer (Component Video) port 3. You may need to change the Input Signal setting in the projector's Signal menu to Auto (see page 68). 4. If you want to play sound through the projector, see page 37 for instructions on connecting an audio cable. Setting Up the Projector 35