Epson EX51 User's Guide - Page 83
warning, 463-7766. Request part number V13H010L54.
UPC - 010343874145
View all Epson EX51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766). Request part number V13H010L54. Follow these steps to replace the lamp: 1. Turn off the projector and unplug the power cord. 2. Let the projector cool for at least an hour (if it has been on). The lamp is extremely hot immediately after use. 3. Loosen the lamp cover screw (you cannot remove it). Then slide the lamp cover off. 4. Loosen the two screws holding the lamp in place (you can't remove them). Loosen, but don't remove these screws warning Let the lamp cool fully before replacing it. In the unlikely event that the lamp has broken, small glass fragments may be present and should be removed carefully to avoid injury. If the projector has been installed on the ceiling, you should stand to the side of the lamp cover, not underneath it. If the lamp is used after the replacement period has passed, the possibility that the lamp may break increases. When a lamp replacement message appears, replace the lamp with a new one as soon as possible, even if it is still working. Maintaining the Projector 83