Epson EX51 User's Guide - Page 71

to 30 minutes., Enabled by default to turn the projector's

Get Epson EX51 PDF manuals and user guides
UPC - 010343874145
View all Epson EX51 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

■ Projection Select Front (to project onto the front of a screen), Front/Ceiling (when the projector is mounted upside-down from the ceiling), Rear (to project from behind onto a transparent screen), or Rear/Ceiling (to project from behind onto a transparent screen when the projector is mounted upside-down from the ceiling). ■ Operation Direct Power On: Enable if you want to be able to start the projector when you connect the power cord (without pressing the Ppower button). Sleep Mode: Enable if you want the projector to turn off automatically if it is idle and no signal is received for 1 to 30 minutes (you can adjust the amount of time using the next setting). Sleep Mode Timer: When Sleep Mode is on, you can set the period of time before the projector turns off automatically, from 1 to 30 minutes. Lens Cover Timer: Enabled by default to turn the projector's power off automatically when the A/V Mute slide is closed for more than 30 minutes. High Altitude Mode: Enable when you are using the projector above 4,900 feet (1,500 meters) to ensure that the temperature is regulated properly. Turn this setting off for lower elevations. ■ Standby Mode Select Communication On to enable the projector to be monitored and controlled from a computer when it is in standby mode (the power light is orange). ■ USB Type B Select how you want to use the USB port. Select USB Display to use the USB port to project computer images. Select Page Up/Down to use the remote control to advance PowerPoint slides. Select Wireless Mouse to use the remote control buttons like a wireless mouse. See page 56 for restrictions and details. note If you hold down the A/V Mute button on the remote control for about five seconds, you switch between Front and Front/Ceiling or Rear and Rear/Ceiling. If Direct Power On is enabled, the power cord is connected, and a power outage occurs, the projector will start when the power is restored. note Do not use the projector at altitudes above 7,500 feet (2,286 meters). Fine-Tuning the Projector 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Fine-Tuning the Projector
71
■
Projection
Select
Front
(to project onto the front of a screen),
Front/Ceiling
(when the projector is mounted upside-down from the ceiling),
Rear
(to project from behind onto a transparent screen), or
Rear/Ceiling
(to project from behind onto a transparent screen
when the projector is mounted upside-down from the ceiling).
■
Operation
Direct Power On:
Enable if you want
to be able to start the
projector when you connect the power cord (without pressing the
P
power
button).
Sleep Mode
: Enable if you want the projector to turn off
automatically if it is idle and no signal is received for 1 to 30
minutes (you can adjust the amount of time using the next
setting).
Sleep Mode Timer
: When Sleep Mode is on, you can set the
period of time before the projector turns off automatically, from
1 to 30 minutes.
Lens Cover Timer
: Enabled by default to turn the projector’s
power off automatically when the
A/V Mute
slide is closed for
more than 30 minutes.
High Altitude Mode
: Enable when you are using the projector
above 4,900 feet (1,500 meters) to ensure that the temperature is
regulated properly. Turn this setting off for lower elevations.
■
Standby Mode
Select
Communication On
to enable the projector to be
monitored and controlled from a computer when it is in standby
mode (the power light is orange).
■
USB Type B
Select how you want to use the USB port. Select
USB Display
to
use the USB port to project computer images. Select
Page
Up/Down
to use the remote control to advance PowerPoint
slides. Select
Wireless Mouse
to use the remote control buttons
like a wireless mouse. See page 56 for restrictions and details.
note
If you hold down the
A/V
Mute
button on the remote
control for about five
seconds, you switch between
Front
and
Front/Ceiling
or
Rear
and
Rear/Ceiling
.
If
Direct Power On
is
enabled, the power cord is
connected, and a power
outage occurs, the projector
will start when the power is
restored.
note
Do not use the projector at
altitudes above 7,500 feet
(2,286 meters).