Epson XP-400 User Manual - Page 180
Paper Feeding Problems, Paper Jam Problems, Solving Paper Problems - scanner error
View all Epson XP-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Paper Feeding Problems If you have problems feeding paper, try these solutions: • If paper does not feed for printing, remove it. Then reload it in the sheet feeder against the right side and beneath the tab. Slide the edge guide against the edge of the paper, making sure that the paper stack is not above the arrow mark on the edge guide. • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it. • If paper jams when you load only one or two sheets, try loading more sheets at a time. Do not load more than the recommended number of sheets. • If paper jams when you print on both sides of the paper, try loading fewer sheets. • For best results, follow these guidelines: • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick. • Load paper in the sheet feeder printable side up. • Follow any special loading instructions that came with the paper. Parent topic: Solving Paper Problems Paper Jam Problems If you have problems with paper jams, try these solutions: 1. Cancel the print job from your computer, if necessary. 2. Gently pull out any jammed paper from the output tray and sheet feeder. 3. Press the start button to resume printing. If the product messages still show an error, continue with the next step. 4. Press the power button to turn the product off. 5. Lift up the scanner unit, and remove the jammed paper and any torn pieces. 180