Garmin RINO 520 Owner's Manual - Page 121
Interface Information, NMEA 0183 Version 3.01 Approved Sentences, GARMIN Proprietary Sentences
UPC - 753759049072
View all Garmin RINO 520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Interface Information Interface formats are selected in the Setup Interface Page. See also the "MapSource Setup" section of this Appendix for information on using the Rino 520/530 with MapSource. The input/output lines on your Rino 520/530 unit can be made RS232 compatible by using the optional RS232 PC Interface Cable accessory available from Garmin, in order to interface to a wide range of external devices, including PCs, differential beacon receivers, marine autopilots, or a second GPS receiver. Refer to the Garmin web site www. garmin.com for the RS232 Cable Accessory ordering information. The NMEA 0183 version 3.01 interface format is supported by the Rino 520/530 and enables the unit to drive up to three NMEA devices. NMEA 0183 Version 3.01 Approved Sentences: GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE, GPVTG, GPWPL, GPBOD Appendix > Interface Information GARMIN Proprietary Sentences: PGRME (estimated error), PGRMM (datum string), PGRMZ (altitude), PSLIB (beacon receiver control) DGPS (Differential GPS) corrections are accepted in RTCM-SC-104 version 2.0 format through the 'Data IN' line. The Garmin GBR 21 and GBR 23 are the recommended beacon receivers for use with the Rino 520/530. Other beacon receivers with the correct RTCM format may be used, but may not correctly display status or allow tuning control from the GPS unit. 111 Rino® 520/530 Owner's Manual