Garmin RINO 520 Owner's Manual - Page 21
Adjusting the Volume and Squelch Level:, To change the Channel and/or Code
UPC - 753759049072
View all Garmin RINO 520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Unit Operation > Radio Page Setting the code to 0 (code off) allows you to hear all To change the Channel and/or Code: activity on the selected channel, but you must be set to the same code as the other person(s) to transmit back. See the "Appendix" for a table listing all of the 38 Codes and 1. Using the Thumb Stick, highlight the Channel or Code field and then press the Thumb Stick In to show a list of available channels/codes. their frequencies. As you change channels, the Rino 520/530 remembers the last channel/code combination that you were using. For example, you may set the unit channel to 5 and code to 21, then change the channel to 8 and code to 2. If you change the channel back to 5, the code changes back to its previous setting of 21. See the "Appendix" for more information on FRS/GMRS and its operational aspects. 2. Move the Thumb Stick Up or Down to scroll through the selections. Because not all the items fit in the window, a slider bar on the right side indicates your current position in the list. 3. Highlight the selection, press the Thumb Stick In. Adjusting the Volume and Squelch Level: 1. Press the Volume Control (V) button to display the Volume/Squelch Level Control window. 2. Move the Thumb Stick Up or Down to adjust the volume level. Choose from 38 codes. Setting the unit to zero will allow you to hear all transmissions on that channel, but you must be on the same code to radio back. 3. Use the Thumb Stick to set the squelch level by moving the slider all the way to the Left to unmute the background noise (weak signals that you don't want to hear). Then slowly move it to the Right until the background noise stops. The squelch is set. Volume/Squelch Adjustment Rino® 520/530 Owner's Manual 11