Gateway FX540X 8512728 - FX540 Hardware Reference Guide - Page 60
Caution
View all Gateway FX540X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
CHAPTER 5: Upgrading Your Computer 3 Find the memory module banks on your system board. DIMM 3 DIMM 1 DIMM 2 DIMM 0 4 If you are removing a DIMM from the memory module bank, gently pull the plastic tabs away from the sides of the memory module and remove it. - OR If you are adding a DIMM to an empty memory module bank, gently pull the plastic tabs away from the sides of the memory module bank. 5 Align the notches on the new DIMM with the notches on the memory module bank, then press the module firmly into the bank. The tabs on the sides of the memory module should snap into place to secure the memory module. Caution Make sure that you install modules of the same type into both slots of a memory channel (bank). 6 Return your computer to its upright position. 7 Replace the side panel by following the instructions in "Replacing the side panel" on page 52. 8 Reconnect the cables and the power cord. 54