HP 300X HP Jetdirect Print Server Administrator's Guide (300x, 510x) - Page 43
h1:Head 1 - LPD Setup Overview, h2:Head 2 - Step 1. Setting Up IP Parameters - jetdirect ip setup
UPC - 882780300842
View all HP 300X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
● The LAN hardware address (or station address) of the print server. This address is printed with print server status information on the HP Jetdirect configuration page and is of the form: LAN HW ADDRESS: xxxxxxxxxxxx where x is a hexadecimal digit (for example, 001083123ABC). ● An IP address configured on the HP Jetdirect print server. LPD Setup Overview The following steps are necessary to configure the HP Jetdirect print server for LPD printing: 1. Setting up IP parameters. 2. Setting up print queues. 3. Printing a test file. The following sections provide detailed descriptions for each step. Step 1. Setting Up IP Parameters To set up IP parameters on the HP Jetdirect print server, refer to chapter 3. For more information on TCP/IP networks, refer to appendix A. Step 2. Setting Up Print Queues You must set up a print queue for each printer or printer personality (PCL or PostScript) you use on your system. Also, different queues are required for formatted and unformatted files. The queue names text and raw in the following examples (see rp tag) have special meanings. Table 4.2 Supported Queue Names raw, raw1, raw2, raw3 no processing text, text1, text2, text3 carriage return added auto, auto1, auto2, auto3 automatic ENWW Configuring for LPD Printing 43