HP 300X HP Jetdirect Print Server Administrator's Guide (300x, 510x) - Page 81

Table 7.4 Novell NetWare Configuration Messages (2 of 2) Message PORT X STATUS: Description READY: Print server is awaiting data. SERVER NAME: INITIALIZING: Print server is registering the node address or name/type. The name of the NetWare file server or print server. If no name is displayed, the Jetdirect print server has not been configured. NETWORK XXXXXX FRAME TYPE XXXXX RCVD XXXX If the message "UNABLE TO FIND FILE SERVER" appears in the "IPX/SPX STATUS:" section of the configuration page, the SERVER NAME field identifies the Jetdirect discovery method [NSQ] (Nearest Service Query) or [GSQ] (General Service Query) and the name of the proxy file server used to locate the configured bindery servers. The first column indicates the network number associated with the protocol frame type for communication between server and printer. Unless a specific frame type has been manually configured, the print server automatically determines the protocol frame type by listening to the NetWare data being transferred over the network. If UNKNOWN is listed, the HP Jetdirect print server is still trying to determine which network number to use. If the network number is DISABLED, a specific frame type has been manually configured. The Frame Type value can be EN_8023, EN_8022, EN_II, or EN_SNAP. The RCVD count indicates how many packets have been received for each frame type. Table 7.5 DLC/LLC Configuration Messages Message DLC/LLC STATUS: SERVER ADDRESS: Description Current DLC/LLC status: DISABLED: Indicates that DLC/LLC was manually disabled through the printer's control panel (if available). DISABLED: Indicates that LAN Server was manually disabled through the printer's control panel (if available). READY: Indicates the HP Jetdirect print server is awaiting data. NOT IN USE: Code is in the middle of a download. Station address of the remote end of the connection. ENWW HP Jetdirect Configuration Page Messages 81