HP 300X HP Jetdirect Print Server Administrator's Guide (300x, 510x) - Page 75
Table 7.2, General HP Jetdirect Messages 7 of 10, HP Jetdirect Configuration Messages 75
UPC - 882780300842
View all HP 300X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Table 7.2 General HP Jetdirect Messages (7 of 10) Message NOT CONFIGURED NOVRAM ERROR OUT OF BUFFERS OVERFLOW ERROR PASSWORD ERROR Description The HP Jetdirect print server has not been configured for NetWare. Use the printer installation software to configure the print server for NetWare networks. The HP Jetdirect print server cannot read the contents of its NOVRAM. The HP Jetdirect print server was unable to allocate a buffer from its internal memory. This indicates all buffers are busy due possibly to heavy broadcast traffic or large amounts of network traffic directed to the print server. Run the power-on self-test: turn the print server off, then on again. The HP Jetdirect print server detected that the password for the NetWare print server object is wrong. Use the PCONSOLE utility to erase the password for the print server object. When the HP Jetdirect print server logs on again, it sets a new password. POSTSCRIPT MODE NOT SELECTED or POSTSCRIPT UPDATE NEEDED PRINT SERVER NOT DEFINED Note: When multiple file servers are configured, the error is only displayed on the configuration page if none of the file servers are connected. The printer does not support the EtherTalk extensions. It may be a printer which does not support AppleTalk. When this message is displayed, the other AppleTalk messages (ADDRESS, APPLETALK NAME, ZONE NAME) are not displayed. The file server does not have a print server object that corresponds to the specified NetWare node name. Use printer installation software or PCONSOLE to create the print server object. When the HP Jetdirect print server is configured for multiple file servers, the error is only displayed on the configuration page if none of the file servers made the connection. PRINTER NUMBER IN USE The printer number assigned to the printer is already in use by another printer. Assign an unused printer number. This may also occur when a printer is power cycled, in which case the error goes away after the print server times out and detects the lost connection. PRINTER NUMBER NOT DEFINED The printer number you assigned to the remote printer has not been defined. Assign a valid printer number to the HP Jetdirect print server, or run PCONSOLE and define a printer number for the print server. ENWW HP Jetdirect Configuration Page Messages 75