HP 300X HP Jetdirect Print Server Administrator's Guide (300x, 510x) - Page 79
Table 7.3, Network Statistics, HP Jetdirect Configuration Messages 79
UPC - 882780300842
View all HP 300X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Table 7.3 Network Statistics Message UNICAST PACKETS RCVD: TOTAL PACKETS RECEIVED: BAD PACKETS RCVD: FRAMING ERRORS RCVD: PACKETS TRANSMITTED: UNSENDABLE PACKETS: XMIT COLLISIONS: XMIT LATE COLLISIONS: IPX/SPX RETRANS: BAD LENGTH RCVD: LOST FRAMES: Description Number of frames specifically addressed to this HP Jetdirect print server. This does not include broadcasts or multicasts. Total number of frames (packets) received by the HP Jetdirect print server without error. This includes broadcast, multicast packets, and packets specifically addressed to the print server. This number does not include packets specifically addressed to other nodes. Total number of frames (packets) received by the HP Jetdirect print server with errors. Maximum of CRC (Cyclic Redundancy Check) errors and framing errors. CRC errors are frames received with CRC errors. Framing errors are frames received with alignment errors. A large number of framing errors could indicate a cabling problem with your network. Total number of frames (packets) transmitted without error. Total number of frames (packets) not successfully transmitted because of errors. Number of frames not transmitted because of repeated collisions. Total number of frames not transmitted because a late collision occurred. A large number may indicate a cabling problem on the network. Number of retransmissions necessary because a remote node did not acknowledge receipt of a frame sent to it. Excessive retransmissions may degrade performance, cause 40 ERRORS, or indicate developing network hardware or congestion problems. Total number of frames missed because they were too long for the HP Jetdirect print server to receive. Number of times the end of the frame could not be detected while transmitting. ENWW HP Jetdirect Configuration Page Messages 79