HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui
HP 8/20q Manual
 |
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 8/20q manual content summary:
- HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 1
fabric, switch, and port management tasks. This guide also provides an alphabetical listing of the the CLI commands, including the command syntax, operands, and notes, and examples of their use. This guide is for users who are responsible for installing and servicing Fibre Channel equipment using - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 2
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft, Windows, Windows XP, and Windows NT and Internet Explorer are U.S. registered trademarks of Microsoft Corporation. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 3
process information 38 Elapsed time between resets 38 Configuration information 38 Switch configuration parameters 39 Zoning configuration parameters 39 Security configuration parameters 40 Hardware information 41 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 3 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 4
activation 50 One-step firmware installation 51 Custom firmware installation 52 Testing a switch 52 Online tests for switches 53 Offline tests for switches 53 Connectivity tests for switches 53 Displaying switch test status 54 Canceling a switch test 54 Verifying and tracing Fibre Channel - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 5
zones to a zoneset 79 Removing zones from a zoneset 79 Activating a zoneset 79 Deactivating a zoneset 79 Managing zones 79 Creating Managing SSL and SSH services 83 Displaying SSL and SSH services 84 Creating an SSL HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 5 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 6
groups from a security set 95 Activating a security set 95 Deactivating a Call Home messages 106 Technical support interface 107 Configuring the Call Home service 108 Managing the Call Home version 3 user account 123 13Command Reference 125 Access authority 125 Syntax and operands 125 Notes and - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 7
221 set switch state 228 set timezone 229 show about 230 show alarm 232 show broadcast 233 show chassis 234 show config port 235 show config security 236 show config security portbinding 237 show config switch 238 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 7 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 8
279 show version 280 show voltage 282 shutdown 283 snmpv3user 284 test cancel 287 test port 288 test status 290 test switch 292 uptime 294 user 295 whoami 297 zone 298 zoneset 301 zoning active 303 zoning cancel 304 zoning clear 305 zoning configured 306 zoning delete orphans 307 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 9
204 Component event monitoring filter parameters 205 Event display filter parameters 206 Severity level monitoring parameters 206 Port monitoring parameters 206 Pagebreak state parameters 208 Transmission speed parameters 209 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 9 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 10
Port administrative state parameters 209 Call Home service configuration attributes 210 Common RADIUS server configuration attributes 212 Server-specific RADIUS server configuration attributes 212 Switch services settings 215 Common SNMP configuration parameters 218 SNMP trap configuration - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 11
log in until you change the default password. Warning: Your user account password has not been changed. It is strongly recommended that you do so before proceeding. To log off, enter the exit command: 8/20q FC Switch #> exit HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 11 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 12
the serial port: 1. Configure the workstation port with the following settings: • 9,600 baud • 8-bit character • 1 stop bit • No parity 2. Enter an account name and password when prompted. The default account name is admin, and the password is password. NOTE: A switch supports a combined maximum - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 13
the file from the switch to a remote host. Otherwise, you can use FTP to download the support file from the switch to your workstation. NOTE: Support files are deleted from the switch during a power-cycle or switch reset. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 13 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 14
FTP service on localhost.localdomain. If your workstation does not have an FTP server, enter the create support command to create the support file, and then use FTP to download the support file from the switch to your workstation, as shown in the following example: 8/20q FC Switch #> create support - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 15
support and log files: • See "Installing firmware" (page 50). • See "Backing up and restoring a switch configuration" (page 46). • See "Creating and downloading a log file" (page 103). • See "Creating a support file" (page 13). HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 16
16 Command Line Interface Usage - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 17
recovery tasks. For information about using Maintenance mode, see the HP StorageWorks 8/20q Fibre Channel Switch Installation and Reference Guide. Displaying user account information You can display all user accounts defined on the switch (user accounts command) or just those user accounts that are - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 18
. • The user command edits and deletes user accounts. • The passwd command changes passwords. The following example removes the expiration date and admin authority for the user account named user1. 8/20q FC Switch (admin) #> user edit Press 'q' and the ENTER key to abort this command. account - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 19
) #> passwd user2 Press 'q' and the ENTER key to abort this command. account OLD password : ******** account NEW password (8-20 chars) : ******** please confirm account NEW password: ******** password has been changed. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 19 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 20
20 User Account Configuration - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 21
the show setup system ipv6 command: 8/20q FC Switch #> show setup system ipv6 System Information EthIPv6NetworkEnable EthIPv6NetworkDiscovery EthIPv6NetworkAddress EthIPv6GatewayAddress False Static 2001::1/64 fe80::1 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 21 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 22
a server. The switch supports network discovery from the following server types: • Bootstrap Protocol (BootP) • Reverse Address Resolution Protocol (RARP) • Dynamic Host Configuration Protocol (DHCP) To configure the IPv4 parameters, enter the set setup system ipv4 command: 8/20q FC Switch (admin - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 23
False) : EthIPv6Discovery (1=Static, 2=Dhcpv6, 3=Ndp) : EthIPv6NetworkAddress (IPv6 Address/Mask Length format) : EthIPv6GatewayAddress (IPv6 Address) : Do you want to save and activate this system setup? (y/n): [n] HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 23 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 24
want to save and activate this system setup? (y/n): [n] Verifying a switch in the network You can use the ping command to verify that a switch is communicating in the network. The following example successfully tests the network for a switch with IP address 10.20.11.57. 8/20q FC Switch #> ping 10.20 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 25
to more than one IP address, the switch creates the necessary policies and associations. You can recognize these dynamic policies and associations because their names begin with DynamicSP_ and DynamicSA_ respectively. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 25 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 26
problem through the serial port interface. For information about using maintenance mode and connecting through the serial port, see the HP StorageWorks 8/20q Fibre Channel Switch Installation and Reference Guide. Displaying IP active policies and associations: 8/20q FC Switch #> ipsec list Active - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 27
made up of user-defined policies and dynamic policies (policies created by the switch). In addition to creating a policy, you can delete, modify, rename, and copy user-defined policies. Dynamic policies can only be copied. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 27 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 28
(1=default, Switch #> admin start 8/20q FC Switch (admin) #> ipsec edit 8/20q FC Switch (admin-ipsec) #> ipsec policy delete policy_1 The security policy will be deleted. Please confirm (y/n): [n] y 8/20q FC Switch (admin-ipsec) #> ipsec save The IPsec configuration will be saved and activated - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 29
before it can take effect, or to discard this configuration use the 'ipsec cancel' command. 8/20q FC Switch (admin-ipsec) #> ipsec save The IPsec configuration will be saved and activated. Please confirm (y/n): [n] y HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 29 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 30
FC Switch #> admin start 8/20q FC Switch (admin) #> ipsec edit 8/20q FC Switch (admin-ipsec) #> ipsec policy copy policy_1 policy_a 8/20q FC Switch (admin-ipsec) #> ipsec save The IPsec configuration will be saved and activated. Please confirm (y/n): [n] y Managing the security association database - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 31
56 byte key) 5=aes-cbc (16/24/32 byte key) 6=twofish-cbc (16-32 byte key) encryption algorithm choice 20q FC Switch (admin-ipsec) #> ipsec save The IPsec configuration will be saved and activated. Please confirm (y/n): [n] y HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 32
key) 3=null (0 byte key) 4=blowfish-cbc (5-56 byte key) 5=aes-cbc (16/24/32 byte key) 6=twofish-cbc (32 byte key) encryption algorithm choice : * 'ipsec cancel' command. 8/20q FC Switch (admin-ipsec) #> ipsec save The IPsec configuration will be saved and activated. Please confirm (y/n): [n] - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 33
Edit session. 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> reset ipsec The IPsec configuration will be reset and the default values activated. Please confirm (y/n): [n] y Reset and activation in progress .... HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 33 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 34
34 Network Configuration - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 35
36 • Switch operational information, page 37 • System process information, page 38 • Elapsed time between resets, page 38 • Configuration information, page 38 • Hardware information, page 41 • Firmware information, page 41 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 35 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 36
. The show ns command displays the WWNs that are local to the switch. 8/20q FC Switch #> show ns all Seq Domain Port Port No ID ID Type COS PortWWN No entries found for domain ID 1. NodeWWN ------- Seq Domain Port Port No ID ID Type COS PortWWN No entries found for domain ID - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 37
month date time year) 0 19 (0x13) 130000 128 Critical 20 15 PowerUp Vx.x.x.0 (day month date time year) Vx.x.x.0 (day month date time year) default Online False Off Online False 00000000 Passed 00000000 NeverRun 32 Normal HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 37 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 38
224 0.3 2.8 00:09:59 249 224 0.0 0.3 00:00:16 251 224 0.0 0.4 00:00:06 252 224 0.0 0.6 00:00:16 253 224 0.0 0.8 00:00:08 254 224 0.0 0.5 00 firmware activation does not reset the elapsed time reported by this command. The following example displays the time since the last reset. 8/20q FC Switch - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 39
See Table 38 for descriptions of these parameters. 8/20q FC Switch #> show config zoning Configuration Name: default Zoning Configuration Information MergeAutoSave True DefaultZone Allow DiscardInactive False HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 39 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 40
35 for descriptions of the port binding parameters. 8/20q FC Switch #> show config security Configuration Name: default Switch Security Configuration Information FabricBindingEnabled False AutoSave True Port ---0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Binding Status True - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 41
patterns, see the HP StorageWorks 8/20q Fibre Channel Switch Installation and Reference Guide. Table 3 Heartbeat LED activity HeartBeatCode-HeartBeatStatus Description 1-Normal 2-AppDied 3-PostFailed One blink per second-Normal operation Two blink cluster-Internal firmware failure Three blink - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 42
does not support the SSL service. If SSL is enabled, you will be unable to manage the switch using this version of Simple SAN Connection Manager. To display the current switch services settings, enter the show setup services command, as shown in the following example: 8/20q FC Switch #> show setup - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 43
in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> set setup services A list of attributes ] [False] [True ] [True ] [True ] Do you want to save and activate this services setup? (y/n): [n] HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 43 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 44
the config list command does not require an Admin session. 8/20q FC Switch #> config list Current list of configurations default config_1 config_2 Activating a switch configuration To activate a switch configuration (config_1), enter the config activate command in an Admin session, as shown in the - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 45
msec) (decimal value, 10-20000 msec) (decimal value, 1-255) (string, max=64 chars) [Online ] [True ] [True ] [True ] [1000 ] [2 ] [False ] [8/20q FC Switch] [10000 ] [2000 ] [254 ] [Default Config] HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 45 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 46
switch. 8/20q FC Switch #> config backup The configdata file contains the following switch configuration information: • All named switch configurations including port, switch, port case, open an FTP session with account name images and password images. Transfer the file in binary mode with the put - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 47
date command, you can set the time zone using the set timezone command. The default time zone is Universal Time (UTC), also known as Greenwich Mean Time (GMT). example: 8/20q FC Switch #> date Mon Apr 07 07:51:24 2008 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 47 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 48
Dakota, for example), enter the set timezone command in an Admin session, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> set timezone Africa Antarctica Atlantic America Asia Australia Europe Indian Pacific UTC Press ENTER for more options or - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 49
Clears the event log X X X Deletes supports files, firmware image files that have not been unpacked, and configuration backup files X X Closes all management sessions X X X Performs power-on self test (POST) X HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 49 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 50
and perform a disruptive activation as described in "One-step firmware installation" (page 51). To perform a non-disruptive activation, see "Custom firmware installation" (page 52). Non-disruptive activation You can load and activate firmware upgrades on an operating switch without disrupting data - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 51
the password for your account name (FTP only). 331 Password required for johndoe. Password:****** 230 User johndoe logged in. The firmware will now be downloaded from the remote host to the switch, installed, and activated. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 51 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 52
user:images password: images ftp>bin ftp>put filename ftp>quit 2. Display the list of firmware image files on the switch to confirm that the file was loaded: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) $> image list 3. Unpack the firmware image file to install the new firmware in flash - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 53
test exercises all internal port and inter-port connections. • An external loopback test exercises all internal ports, transceivers, and inter-port connections. A transceiver with a loopback plug is required for all ports. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 53 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 54
: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> set switch state diagnostics 8/20q FC Switch (admin) #> test switch connectivity internal A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the default value - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 55
license key features are available: • The HP StorageWorks 8/20q Port Activation Upgrade LTU enables additional SFP ports in increments of four for totals of 16 or 20 ports. Installing a feature license key is not disruptive, nor does it require a switch reset. To order a license key, contact - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 56
install a license key on your switch, enter the feature add command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> feature add 1-LCVXOWUNOJBE6 License upgrade to 20 ports Do you want to continue with license upgrade AdminTimeout). By default, no timeout - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 57
of the port. See Table 33 for descriptions of these parameters. 8/20q FC Switch #> show config port 3 Configuration Name: default Port Number: 3 GL Port3 False True False False 0 0 True True True False Auto True HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 57 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 58
the show port command. 8/20q FC Switch #> show port 1 Port Number: 1 ------------ AdminState Online AsicNumber 0 AsicPort 2 ConfigType GL DownstreamISL False EpConnState Connected EpIsoReason NotApplicable IOStreamGuard Disabled Licensed True LinkSpeed 8Gb/s LinkState Active - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 59
RisingTrigger 5 FallingTrigger 1 SampleWindow 10 LogoutMonitoringEnabled True RisingTrigger 5 FallingTrigger 1 SampleWindow 10 LOSMonitoringEnabled True RisingTrigger 100 FallingTrigger 5 SampleWindow 10 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 59 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 60
Switch #> show perf Port Bytes/s Bytes/s Number (in) (out) 0 7K 136M 1 58K 0 2 0 0 3 0 0 4 0 0 5 0 0 6 0 7K 7 136M 58K 8 7K 136M 9 58K 0 10 0 0 11 0 0 12 0 0 13 0 0 14 0 7K 15 136M 58K 16 62. 8/20q FC Switch #> show media 4 Port Number: 4 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 61
admin start 8/20q FC Switch (admin) config edit 8/20q FC Switch (admin) #> set config ports 3 . . . 8/20q FC Switch (admin-config)#> config save 8/20q FC Switch (admin)#> config activate 8/20q FC Switch (admin)#> admin end HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 61 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 62
that are supported in a remote fabric, see the HP StorageWorks 8/20q Fibre Channel Switch release notes, and the HP StorageWorks SAN Design Reference Guide located at the HP website: http://www.hp.com/go/sandesignguide. This type of inter-fabric connection uses the Fibre Channel industry N-Port ID - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 63
cancel command. 8/20q FC Switch (admin-config) #> config save 8/20q FC Switch (admin-config) #> config activate 3. Connect the TR_Port to the remote fabric. For remote HP StorageWorks B-Series or C-Series fabrics, the switch to which the TR_Port is connected must support NPIV, and for B-Series - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 64
enter the show config security portbinding command, as shown in the following example: 8/20q FC Switch #> show config security portbinding Configuration Name: default Port ---0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Binding Status True True False True True False True False True False - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 65
within three consecutive sampling windows (by default, 30 seconds). Reset the port to bring it back online. An alarm is cleared when the threshold monitoring detects that the error rate has fallen below the falling trigger. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 65 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 66
must be saved (see config save command) and activated (see config activate command) before it can take effect. To discard this configuration use the config cancel command. 8/20q FC Switch (admin-config) #> config save 8/20q FC Switch (admin-config) #> config activate 66 Port Configuration - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 67
want to start the test? (y/n) [n] y The test has been started. A notification with the test result(s) will appear on the screen when the test has completed. 8/20q FC Switch (admin) #> Test for port 1 Passed. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 67 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 68
test: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> set port 1 state diagnostics 8/20q FC Switch (admin) #> test port 1 offline internal A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the default value. If - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 69
all zonesets in the non-volatile zoning database. To display a list of the zonesets, enter the zoneset list command, as shown in the following example: 8/20q FC Switch #> zoneset list Current List of ZoneSets alpha beta HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 69 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 70
following example. Merged and edited zonesets are displayed if they exist. 8/20q FC Switch #> zoning list Active (enforced) ZoneSet Information ZoneSet Zone ZoneMember wwn wwn_23bd31 50:06:04: 06:04:82:bf:d2:18:d2 10:00:00:00:c9:22:14:16 wwn_2215c3 50:06:04:82:bf:d2:18:c2 50:06:04:82: - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 71
the zoneset active command, as shown in the following example: 8/20q FC Switch #> zoneset active Active ZoneSet Information ActiveZoneSet Bets LastActivatedBy admin@OB-session6 LastActivatedOn day month date time year HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 71 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 72
when a change occurred to the active zoneset or a fabric merge occurred. To display the unsaved edited zoneset information, enter the zoning edited command in an Admin session and a Zoning Edit session, as shown in the following example: 8/20q FC Switch (admin-zoning) #> zoning edited Edited - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 73
zone information To display a list of zones that are not members of any zoneset, enter the zone orphans command, as shown in the following example: 8/20q FC Switch #> zone orphans Current list of orphan zones zone3 zone4 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 73 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 74
To display a record of zoning modifications, enter the zoning history command, as shown in the following example: 8/20q FC Switch #> zoning history Active Database Information ZoneSetLastActivated/DeactivatedBy ZoneSetLastActivated/DeactivatedOn Database Checksum Remote day mon date hh:mm:ss yyyy - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 75
example: 8/20q FC Switch #> zoning 17 1 166 19 10 23 9 16 5 5 3 3 8 8 24 ports/devices that are not defined in the active zoneset. • DiscardInactive-Enables or disables the discarding of all zonesets except the active zoneset. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 76
name, the active configuration is assumed. The Config Edit session provides access to the set config zoning command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> config edit The config named default is being edited. 8/20q FC Switch (admin-config - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 77
, as shown in the following example: 8/20q FC Switch (admin) #> zoning merged capture This command will overwrite the configured zoning database in NVRAM. Please confirm (y/n): [n] y The merged zoning database has been saved. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 77 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 78
zonesets, zones, and aliases To delete all objects from the zoning database except those in the active zoneset, enter the zoning delete orphans command. 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> zoning delete orphans This command will remove all zonesets, zones, and aliases that are - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 79
zone delete command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> zoning edit 8/20q FC Switch (admin-zoning) #> zone delete zone_1 8/20q FC Switch (admin-zoning) #> zoning save HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 79 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 80
copy command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> zoning edit 8/20q FC Switch (admin-zoning) #> zone copy zone_1 zone_2 8/20q FC Switch (admin-zoning) #> zoning save Adding members to a zone To add ports/devices to zone_1, enter the zone add - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 81
command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> zoning edit 8/20q FC Switch (admin-zoning) #> alias remove alias_1 1,4 1,5 8/20q FC Switch (admin-zoning) #> zoning save HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 81 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 82
82 Zoning Configuration - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 83
services: • Simple SAN Connection Manager version 1.0 does not support the SSL service. If SSL is enabled, you will be unable to manage the switch using this version of Simple SAN activate this services setup? (y/n): [n] y HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 83 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 84
services, enter the show setup services command, as shown in the following example: 8/20q FC Switch #> show setup services System Services establish an SSL connection with a management application such as Simple SAN Connection Manager, QuickTools, or Enterprise Fabric Management Suite. The - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 85
using the switch's security database, or remotely using a Remote Dial-In User Service (RADIUS) server only the switch or both the switch and the initiator device, if the device supports authentication. 47. 8/20q FC Switch #> HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 86
common RADIUS server configuration parameters: 8/20q FC Switch (admin) #> set setup radius can be enabled using the 'set setup services' command. Current Values: DeviceAuthOrder UserAuthOrder TotalServers Do you want to save and activate this radius setup? (y/n): [n] 86 RADIUS Server - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 87
configures RADIUS server 1: 8/20q FC Switch (admin) #> set setup be enabled using the 'set setup services' command. Server 1 Current Values: +) : Do you want to save and activate this radius setup? (y/n): [n] HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 87 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 88
88 RADIUS Server Configuration - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 89
are authorized to attach to a switch. There are three types of groups: one for other switches (ISL), another for devices (port), and a third for devices 20q FC Switch #> securityset list Current list of SecuritySets alpha beta HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 90
and group members, enter the security active command, as shown in the following example: 8/20q FC Switch #> security active Active Security Information SecuritySet ----------alpha Group GroupMember group1 (ISL) 10:00:00:00:00:10:21:16 Authentication Chap Primary Hash MD5 Primary Secret - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 91
the following example: 8/20q FC Switch #> group members group_1 Current list of members for Group: group_1 10:00:00:c0:dd:00:71:ed 10:00:00:c0:dd:00:72:45 10:00:00:c0:dd:00:90:ef 10:00:00:c0:dd:00:b8:b7 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 91 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 92
the following example: 8/20q FC Switch #> security history Active Database Information SecuritySetLastActivated/DeactivatedBy the following example: 8/20q FC Switch #> security limits Security Attribute Maximum Current MaxSecuritySets 4 1 MaxGroups 16 2 MaxTotalMembers 1000 19 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 93
time either through Telnet, QuickTools, Simple SAN Connection Manager, or Enterprise Fabric Management 20q FC Switch (admin-config)#> config save 8/20q FC Switch (admin)#> config activate 8/20q FC Switch (admin)#> admin end HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 94
saving changes, enter the security cancel command. 8/20q FC Switch (admin-security)#> security cancel 4. To activate the changes to the active security set, enter the security activate command. 8/20q FC Switch (admin)#> security activate 5. To release the Admin session for other administrators - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 95
admin-security) #> group delete group_port Renaming a group To rename group_port to port_1, enter the group rename command, as shown in the following example: 8/20q FC Switch (admin-security) #> group rename group_port port_1 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 95 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 96
the group add command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> security edit 8/20q FC Switch (admin-security) #> group add Group_1 A list of attributes with formatting and default values will follow Enter a new value or simply press the ENTER - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 97
MD5 / SHA-1 / None) [None] md5 SecondarySecret (32 hex or 16 ASCII char value) [ ] 1234567890123456 Binding (domain ID 1-239, 0=None) : 8/20q FC Switch (admin-security) #> group remove group_1 10:00:00:c0:dd:00:90:a3 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 97 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 98
98 Device Security Configuration - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 99
listing of switch event messages, see the HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Messages Reference Guide. Events are events that originate with the switch, the time stamp comes from the switch; for events that originate with Simple SAN Connection Manager, QuickTools, or - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 100
example of the show log command: 8/20q FC Switch #> show log [327][day month date time year][I][Eport Port:0/8][Eport State= E_A0_GET_DOMAIN_ID] [328][day month date time year][I][Eport Port: 0/8][FSPF PortUp state=0] [329][day month date time year][I][Eport Port: 0/8][Sending init hello] [330][day - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 101
is preserved across switch resets. 8/20q FC Switch (admin) #> set log component switch 8/20q FC Switch (admin) #> set log level warn 8/20q FC Switch (admin) #> set log port 0 1 2 3 8/20q FC Switch (admin) #> set log save HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 101 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 102
example: 8/20q FC Switch (admin) #> set log clear Logging to a remote host The switch comes from the factory with local logging enabled, which instructs the switch firmware to maintain an event log in switch memory. The switch can also be configured to log events to a remote host that supports the - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 103
example: 8/20q FC Switch (admin) password images. Transfer the file logfile in binary mode with the get command. >ftp ip_address user:images password: images ftp>bin ftp>get logfile xxxxx bytes sent in xx secs. ftp>quit HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 104
104 Event Log Configuration - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 105
switch that is to support Call Home e-mail notification has its own Ethernet connection. To test your Call Home service and database configurations, enter the callhome test command. See "Testing a Call Home profile" (page 115). HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 106
sent to the SMTP server, no message will be transmitted. When a qualifying switch action or event occurs, an e-mail message is created and placed in the Call Home queue to be sent to the active SMTP server. You can monitor activity in the queue using the callhome queue stats command. You can also - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 107
command enables you to add instructions to the Tech_Support_Center profile to specify the frequency with which to e-mail the collected data. For more information, see "Adding a data capture configuration" (page 114). HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 107 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 108
example. See Table 46 for a description of the Call Home service configuration entries. 8/20q FC Switch (admin) #> set setup callhome A list of attributes with : ThrottleDupsEnabled (True / False) : Do you want to save and activate this Callhome setup? (y/n): 108 Call Home Configuration - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 109
@localhost.localdomain ThrottleDupsEnabled True + indicates active SMTP server Managing the Call Home service configuration to its factory state, enter the reset callhome command. 8/20q FC Switch (admin) #> reset callhome HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 110
Home data base change history information, enter the callhome history command, as shown in the following example: 8/20q FC Switch #> callhome history CallHome Database History ConfigurationLastEditedBy admin@OB-session2 ConfigurationLastEditedOn day mmm dd hh:mm:ss yyyy DatabaseChecksum - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 111
the Call Home queue, enter the callhome queue stats command, as shown in the following example: 8/20q FC Switch #> callhome queue stats Callhome Queue Information FileSystemSpaceInUse 534 (bytes) EntriesInQueue 3 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 111 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 112
the profile create command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> callhome edit 8/20q FC Switch (admin-callhome) #> profile create profile_1 A list of attributes with formatting and default values will follow. Enter a new value or simply press - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 113
Switch Problem 20q FC Switch (admin-callhome) #> profile copy profile_1 profile_a 8/20q FC Switch (admin-callhome) #> callhome save The CallHome database profiles will be saved and activated. Please confirm (y/n): [n] y HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 114
not exist, you must create it using the profile create command. 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> callhome edit 8/20q FC Switch (admin-callhome) #> capture add A list of attributes with formatting and default values will follow. Enter a value or simply press the ENTER key - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 115
8/20q FC Switch (admin) #> callhome queue clear The callhome queue will be cleared. Please confirm (y/n): [n] y To display the contents of the Call Home message queue, see "Displaying Call Home database information" (page 110). HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 116
reset the Call Home service configuration to the factory defaults, enter the reset callhome command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> reset callhome The callhome configuration will be reset and the default values activated. Please confirm - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 117
[True ] [True ] [False] [False] [True ] [True ] [True ] Do you want to save and activate this services setup? (y/n): [n] You can display the SNMPEnabled parameters using the show setup snmp or show setup services commands. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 117 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 118
SNMP Information SNMPEnabled True Contact Location N_107 System Test Lab Description HP StorageWorks 8/20q FC Switch ObjectID 1.3.6.1.4.1.3873.1.11 AuthFailureTrap True ProxyEnabled True SNMPv3Enabled False Trap1Enabled False Trap1Address 10.0.0.254 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 119
following example sets the common trap parameters for all SNMP traps: 8/20q FC Switch (admin) #> set setup snmp common A list of attributes with True / False) : Do you want to save and activate this snmp setup? (y/n): [n] HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 119 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 120
To reset the SNMP configuration back to the factory defaults, enter the reset snmp command in an Admin session, as shown in the following example. See Table 21 for a listing of the SNMP configuration factory defaults. 8/20q FC Switch (admin) #> reset snmp 120 Simple Network Management Protocol - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 121
parameter to True: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> set activate this snmp setup? (y/n): [n] y The following sub-sections describe how to create, display, and modify SNMP version 3 user accounts. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 122
3 user account, enter the snmpv3user add command as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> snmpv3user add A list of SNMPV3 user attributes with formatting and default values as applicable will follow. Enter a new value OR simply press the ENTER - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 123
command as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> snmpv3user edit A list of to save and activate this setup ? (y/n): [n] y SNMPV3 user account edited and activated. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 123 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 124
124 Simple Network Management Protocol Configuration - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 125
13 Command Reference This chapter provides an alphabetical listing of the CLI commands, including information for each other commands. The Examples paragraph presents sample screen captures of the command and its output. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 125 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 126
fabric and switch configurations. Only one Admin session can be open on the switch at any hardreset, hotreset, quit, shutdown, and reset switch commands will also end an Admin session. session: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> . . . 8/20q FC Switch (admin) #> admin - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 127
device Fibre Channel address (hex) • 16-character hexadecimal WWPN for the device with the format xx:xx:xx:xx:xx:xx:xx:xx. rename [alias_old] [alias_new] Renames the alias given by [alias_old] to the alias given by [alias_new]. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 128
list Current list of Zone Aliases alias1 alias2 The following is an example of the alias members command: 8/20q FC Switch #> alias members alias1 Current list of members for Zone Alias: alias1 50:06:04:82:bf:d2:18:c4 50:06:04:82:bf:d2: - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 129
20q Fibre Channel Switch Call Home service provides an e-mail notification capability for the switch. This service has no relationship with the HP Call Home feature, which notifies HP services Toggles activation between the primary SMTP server and the secondary SMTP server. Though the active server - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 130
following is an example of the callhome history command: 8/20q FC Switch #> callhome history CallHome Database History ConfigurationLastEditedBy admin@OB-session2 example of the callhome list command: 8/20q FC Switch #> callhome list Configured Profiles group4 group5 130 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 131
is an example of the callhome queue stats command: 8/20q FC Switch #> callhome queue stats Callhome Queue Information FileSystemSpaceInUse 534 (bytes) EntriesInQueue 3 See also profile, page 175 reset, page 180 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 131 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 132
trend data are collected from the switch and sent to recipients specified in the remove Operands add Adds data capture instructions to the Tech_Support_Center profile. Table recipients. The format is hh:mm on a 24-hour clock. The default 02:00. Day of the week to send status and trend data Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 133
command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> callhome edit 8/20q FC Switch (admin-callhome) #> capture add A list of attributes with formatting and default values use the 'callhome cancel' command. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 133 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 134
following is an example of the capture remove command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> callhome edit 8/20q FC Switch (admin-callhome) #> capture remove Capture Entries for Profile use the 'callhome cancel' command. See also profile, page 175 134 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 135
to ports 8-19. Please confirm (y/n): [n] y 8/20q FC Switch (admin-config)#> config save 8/20q FC Switch (admin)#> config activate 8/20q FC Switch (admin)#> admin end See also set config port, page 195 show config port, page 235 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 136
[config_destination]. The switch supports up to 10 configurations including the default configuration. delete [config_name] Deletes the configuration given by [config_name] from the switch. You cannot delete the default configuration (Default Config) nor the active configuration. edit [config_name - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 137
the default IP address 10.0.0.1. For information about using maintenance mode, see the HP StorageWorks 8/20q Fibre Channel Switch Installation and Reference Guide. • Configuration archive files created with the QuickTools or Enterprise Fabric Management Suite Archive function are not compatible with - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 138
reset in 3 seconds due to a config restore] 8/20q FC Switch (admin) #> Alarm Msg: [day month date time year][A1000.0005][SM][The switch is being reset] See also set config port, page 195 show config port, page 235 set config switch, page 200 show config switch, page 238 138 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 139
Switch (admin) #> create certificate The current date and time is day mon date hh:mm:ss UTC yyyy. This is the time used to stamp onto the certificate. Is the date and time correct? (y/n): [n] y Certificate generation successful. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 140
20q FC Switch (admin) #> create support Log Msg:[Creating the support file - this will take several seconds] FTP the dump support file to another machine? (y/n): n 8/20q FC Switch (admin) #> quit >ftp switch_ip_address user: images password FTP service on localhost.localdomain. See also date, page - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 141
date command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> date 013110152008 8/20q FC Switch (admin) #> date Thu Jan 31 10:15:03 UTC 2008 See also set setup system, page 221 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 141 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 142
exit Description Closes the switch connection. Authority None Syntax exit Notes You can also press Control-D to close the switch connection. 142 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 143
: 8/20q FC Switch #> fcping 970400 count 3 28 bytes from local switch to 0x970400 time = 10 usec 28 bytes from local switch to 0x970400 time = 11 usec 28 bytes from local switch to 0x970400 time = 119 usec See also fctrace, page 144 ping, page 174 HP StorageWorks 8/20q Fibre Channel Switch Command - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 144
. • 16-character hexadecimal world wide port name (WWPN) with the format xx:xx:xx:xx:xx:xx:xx:xx or xxxxxxxxxxxxxxxx. [hop_count] Maximum number of hops before stopping the trace. If you omit [hop_count], 20 hops is used. Examples The following is an example of the fctrace command: 8/20q FC Switch - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 145
. log Displays a list of installed license key features. Notes • The HP StorageWorks 8/20q Port Activation Upgrade LTU enables additional SFP ports in increments of four on the standard 12-port, single power supply 8/20q Fibre Channel Switch for totals of 16 or 20 ports. Examples The following is an - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 146
IP address or DNS host name of the remote host • An account name and password on the remote host (FTP only) • Pathname for the firmware image file Authority Admin session Syntax firmware install Examples The following is an example of the firmware install command using FTP: 8/20q FC Switch #> admin - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 147
TFTP: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> firmware install The switch will be reset. This process will cause a disruption to I/O traffic. Continuing with this action will terminate all management sessions, including any Telnet sessions. When the firmware activation is complete - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 148
group given by [group]. ISL, Port, and MS member attributes are described default is None. The preferred hash function to use to decipher the encrypted primary secret sent by the ISL member. The hash functions are MD5 or SHA-1. If the ISL member does not support the primary hash, the switch Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 149
CTAuthentication Port worldwide name for the N_Port device that would attach to the switch. Common Transport (CT) authentication. Enables (True) or disables (False) authentication for MS group members. The default is False. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 150
(False) authentication for MS group members. The default is False. The preferred hash function to use to decipher the encrypted primary secret sent by the member. The hash functions are MD5 or SHA-1. If the member does not support the primary hash, the switch will use the secondary hash. The hash - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 151
, you must re-enter the primary and secondary secrets. Otherwise, the switch will isolate because of an authentication failure. For more information about managing groups in security sets, see the securityset command. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 151 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 152
) [3 ] Finished configuring attributes. To discard this configuration use the security cancel command. The following is an example of the group list command: 8/20q FC Switch #> group list Group SecuritySet ----- ----------- group1 (ISL) alpha group2 (Port) alpha 152 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 153
command: 8/20q FC Switch #> group members group_1 Current list of members for Group: group_1 10:00:00:c0:dd:00:71:ed 10:00:00:c0:dd:00:72:45 10:00:00:c0:dd:00:90:ef 10:00:00:c0:dd:00:b8:b7 See also security, page 188 HP StorageWorks 8/20q Fibre Channel Switch Command - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 154
-on self test (POST). This reset disrupts I/O traffic, activates the pending firmware, and clears the alarm log. To save the alarm log before resetting, see the set log command. Authority Admin session Syntax hardreset Notes To reset the switch without a power-on self test, see the reset command - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 155
CONFIG_NAME is given and it exists, it gets edited; otherwise, it gets created. If it is not given, the currently active configuration is edited. Admin mode is required for this command. Usage: config edit [CONFIG_NAME] HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 155 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 156
show switch 2 date 3 help set 4 history 8/20q FC Switch #> !3 help set set SET_OPTIONS There are many attributes that can be set. Type help with one of the following to get more information: Usage: set { alarm port | beacon | setup | config | log | switch } | pagebreak | 156 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 157
during the upgrade may indicate that the new firmware is not supported. To correct this, close the QuickTools session and the browser window, then open a new QuickTools session. See also hardreset, page 154 reset, page 180 set log, page 205 HP StorageWorks 8/20q Fibre Channel Switch Command Line - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 158
from the host IP address given by [ip_address]. If an account name needs a password to access the FTP server, the system will prompt you for it. install Downloads firmware from a remote host to the switch, installs the firmware, then resets the switch to activate the firmware. This is disruptive - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 159
password: ******** ftp>bin ftp>put 8.0.4.xx.xx_epc ftp>quit 8/20q FC Switch (admin) $>image list 8/20q FC Switch (admin) $>image unpack 8.0.4.xx.xx_epc Image unpack command result: Passed See also firmware install, page 146 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 160
IP security configuration. This IP security configuration will be deleted from the switch. NOTE: The preferred method for deleting the IP security configuration from the switch of IP security 20q FC Switch #> ipsec history IPsec Database History ConfigurationLastEditedBy ConfigurationLastEditedOn Active - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 161
: 8/20q FC Switch #> ipsec limits Configured (saved) IPsec Information IPsec Attribute MaxConfiguredSAs MaxConfiguredSPs See also ipsec association, page 162 ipsec list, page 165 ipsec policy, page 168 Maximum ------- 512 128 Current ------- 0 0 HP StorageWorks 8/20q Fibre Channel Switch - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 162
alphanumeric, _, $, ^, and -. The Security Association database supports a maximum of 512 user-defined associations. You must enter switch, or gateway receiving data. If you specified an IP address for the SourceAddress, the DestinationAddress must use the same IP version format. IP Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 163
by [association]. For descriptions of the association parameters, refer to Table 13. If the connection is not secure given by [association]. active Displays the configuration for all active associations. configured Displays HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 163 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 164
ipsec association create command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> ipsec edit 8/20q FC Switch (admin-ipsec) #> ipsec 4=blowfish-cbc (5-56 byte key) 5=aes-cbc (16/24/32 byte key) 6=twofish-cbc (16-32 byte key) encryption algorithm choice : 2 *EncryptionKey Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 165
]. active Displays the configuration for all active policies. configured Displays the configuration for all user-defined policies. edited Displays the configuration for all policies that have been modified, but not saved. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 165 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 166
Security Policy Count: 2 The following is an example of the ipsec list association command: 8/20q FC Switch #> ipsec list association Active IPsec Information h2h-sh-sa Description: Host-to-host: switch->host Source: fe80::2c0:ddff:fe03:d4c1 Destination: fe80::250:daff:feb7:9d02 Protocol: esp - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 167
the ipsec list policy command: 8/20q FC Switch #> ipsec list policy Active IPsec Information h2h-hs-sp Description: Host-to-host: host->switch Source: fe80::250:daff:feb7 ipsec association, page 162 ipsec policy, page 168 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 167 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 168
$, ^, and -. The Security Policy database supports a maximum of 128 user-defined policies. switch, or gateway from which data originates Source port number in the range 1-65535 IP address (version 4 or 6) or DNS host name of the host, switch, or gateway receiving data. If you specified an IP Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 169
]. active Displays the configuration for all active policies. configured Displays the configuration for all user-defined policies. edited Displays the configuration for all policies that have been modified, but not saved. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 169 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 170
ipsec policy create command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> ipsec edit 8/20q FC Switch (admin-ipsec) #> ipsec policy Header 2=esp Encapsulating Security Payload 3=both : 2 *espRuleLevel (1=default, 2=use, 3=require) : 3 The security policy has been Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 171
Syntax lip [port_number] Operands [port_number] The number of the port to be reinitialized. Ports are numbered beginning with 0. Examples The following is an example of the lip command: 8/20q FC Switch (admin) #> lip 2 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 171 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 172
logout Description Closes the switch connection. Authority None Syntax logout Notes You can also press Control-D to close the switch connection. See also exit, page 142 logout, page 172 172 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 173
'q' and the ENTER key to abort this command. account OLD password : ******** account NEW password (8-20 chars) : ******** please confirm account NEW password: ******** password has been changed. See also user, page 295 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 173 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 174
as 255.255.255.255, are not valid. -ipv6 [host_address] IP address (version 6) or DNS host name of the switch you want to query. Examples The following is an example of a ping command that successfully communicated with another switch: 8/20q FC Switch #> ping 10.20.11.57 Ping command issued. Waiting - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 175
-. The Tech_Support_Center profile name is reserved. The Call Home database supports a maximum of 25 profiles. You must enter the callhome save command and default is 2,000,000. Subject of the e-mail; up to 64 characters HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 175 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 176
must be saved with the callhome save command before it can take effect, or to discard this configuration use the callhome cancel command. 8/20q FC Switch (admin-callhome) #> callhome save The CallHome database profiles will be saved and activated. Please confirm (y/n): [n] y 176 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 177
EmailSubject Switch Problem RecipientEmail 20q FC Switch (admin-callhome) #> callhome save The CallHome database profiles will be saved and activated. Please confirm (y/n): [n] y See also callhome, page 129 capture, page 132 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 178
None Syntax ps Examples The following is an example of the ps command: 8/20q FC Switch #> ps PID PPID %CPU %MEM TIME 244 224 0.0 0.3 00:00 33 248 224 0.3 2.8 00:09:59 249 224 0.0 0.3 00:00:16 251 224 0.0 0.4 00:00:06 252 224 0.0 0.6 00:00:16 253 224 0.0 0.8 00:00:08 254 224 0.0 0.5 00:00: Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 179
quit Description Closes the switch connection. Authority None Syntax quit Notes You can also press Control-D to close the switch connection. See also exit, page 142 logout, page 172 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 179 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 180
activated automatically. NOTE: Because this operand changes network parameters, the workstation could lose communication with the switch and release the Admin session. This operand does not affect installed license keys. ipsec Resets the IP security database configuration to its default values. port - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 181
zoning database and deactivates the active zoneset. The zoning configuration parameters (MergeAutoSave, DefaultZone, DiscardInactive) remain unchanged. See Table 20 for information about the zoning configuration parameters. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 181 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 182
Home database configuration. The default values are shown in Table 16. • Enter the show config switch command to display the switch configuration. The default values are shown in Table 17. • Enter the show config port command to display the port configuration. The default values are shown in Table - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 183
True True True 1,000 1 (0x Hex) False 8/20q FC Switch 10000 2000 254 Config Default Port Defaults Online Auto GL Port n, where n is the port number False True False False 0 0 True True False False True False Auto False True HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 183 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 184
True 100 5 10 Table 20 Zoning configuration defaults Parameter MergeAutoSave DefaultZone DiscardInactive Default True Allow False Table 21 SNMP configuration defaults Parameter SNMPEnabled Contact Location Default True 184 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 185
23 Switch services configuration defaults Parameter TelnetEnabled SSHEnabled GUIMgmtEnabled SSLMgmtEnabled EmbeddedGUIEnabled SNMPEnabled NTPEnabled CIMEnabled FTPEnabled Default True False True False True True False True True HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 186
Table 23 Switch services configuration defaults Parameter MgmtServerEnabled CallHomeEnabled Default True True Table 24 DNS host name configuration defaults Parameter Default DNSClientEnabled False DNSLocalHostname DNSServerDiscovery Static DNSServer1Address - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 187
AdminTimeout InactivityTimeout Default 30 0 Table 30 Security configuration defaults Parameter AutoSave FabricBindingEnabled PortBindingEnabled Default True False False See also hardreset, page 154 reset, page 180 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 187 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 188
switch. Authority Admin session. The operands active, history, limits, and list are available without an Admin session. Syntax security active cancel clear edit history limits list restore save Operands active Displays the active . This operand does not require an Admin session. 188 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 189
limits command: 8/20q FC Switch #> security limits Security Attribute Maximum Current MaxSecuritySets 4 1 MaxGroups 16 2 MaxTotalMembers 1000 19 MaxMembersPerGroup 1000 4 15 [Name] ------ group1 group2 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 189 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 190
20q FC Switch #> security list Active Security Information SecuritySet Group GroupMember No active securityset defined. Configured Security Information SecuritySet Group GroupMember alpha group1 (ISL) 10:00:00:00:00:10:21:16 also group, page 148 securityset, page 191 190 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 191
] is the active security set, the group will not be removed until the security set has been deactivated. rename [security_set_old] [security_set_new] Renames the security set given by [security_set_old] to the name given by [security_set_new]. HP StorageWorks 8/20q Fibre Channel Switch Command Line - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 192
groups alpha Current list of Groups for SecuritySet: alpha group1 (ISL) group2 (Port) The following is an example of the securityset list command 8/20q FC Switch #> securityset list Current list of SecuritySets alpha beta See also group, page 148 security, page 188 192 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 193
display of alarms in the output stream allows command scripts to run without interruption. Examples The following is an example of the set alarm command: 8/20q FC Switch #> set alarm on HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 193 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 194
Enables or disables the flashing of the Logged-In LEDs for the purpose of locating a switch. Authority None Syntax set beacon [state] Operands [state] Table 32 describes the beacon Examples The following is an example of the set beacon command: 8/20q FC Switch #> set beacon on 194 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 195
. If enabled, the RSCN message is delayed for 200 ms for locally attached devices and 400 ms for devices connected through other switches. The default is False. This parameter is ignored if IOStreamGuard is enabled. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 195 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 196
with a QLogic HBA. For older QLogic HBAs, such as the QLA2200, the DeviceScanEnabled parameter must also be enabled. The default is Auto. Enables (True) or disables (False) the transmission of ping messages from the switch to all devices on a loop port. The default is True. 196 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 197
be saved (see config save command) and activated (see config activate command) before it can take effect. To discard this configuration use the config cancel command. See also config, page 136 show config port, page 235 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 197 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 198
default is False. Examples The following is an example of the set config security command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> config edit 8/20q FC Switch must be saved (see config save command) and activated (see config activate command) before it can take effect. To discard - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 199
must be saved (see config save command) and activated (see config activate command) before it can take effect. To discard this configuration use the config cancel command. See also show config security portbinding, page 237 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 199 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 200
up to 32 characters excluding #, semicolon (;), and comma (,). The default is 8/20q FC Switch. R_A_TOV E_D_TOV PrincipalPriority ConfigDescription Resource Allocation Timeout Value. The number of milliseconds the switch waits to allow two ports to allocate enough resources to establish a link. The - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 201
1-255) (string, max=64 chars) [Online ] [True ] [True ] [True ] [1000 ] [2 ] [False ] [8/20q FC Switch] [10000 ] [2000 ] [254 ] [Default Config] See also config, page 136 show config switch, page 238 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 201 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 202
the falling trigger. The time in seconds in which to count events Notes The switch will down a port if an alarm condition is not cleared within three consecutive sampling windows (by default, 30 seconds). Reset the port to bring it back online. An alarm is cleared when the threshold monitoring - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 203
must be saved (see config save command) and activated (see config activate command) before it can take effect. To discard this configuration use the config cancel command. See also show config threshold, page 239 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 203 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 204
are all zonesets except the active zoneset. The default is False. Examples The following is an example of the set config zoning command. 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> config edit The config named default is being edited. 8/20q FC Switch (admin-config) #> set config - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 205
archive clear component [filter_list] display [filter] level [filter] port [port_list] restore save start (default) stop Operands archive Collects all log entries and stores the describes the event display filter parameters. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 205 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 206
action. This is the default severity level. Monitors port or ports to monitor. [port_list] can be a set of port numbers and ranges delimited by spaces. For example, 0 2 10-15 specifies ports 0, 2, 10, 11, 12, 13, 14, and 15. Specifies all ports Disables monitoring on all ports 206 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 207
port, component, and level settings to the default values. save Saves the log settings for the component, severity level, port, and display level. These settings remain in effect after a switch . See also show log, page 247 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 207 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 208
(list, members) • zoneset (list, zones) • zoning (active, list) Allows continuous display of information without a break. This is the default. Examples The following is an example of the set pagebreak command: 8/20q FC Switch #> set pagebreak on 8/20q FC Switch #> zone list Zone ---Zone1 ZoneSet - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 209
the Set Port State command. Therefore, to avoid unexpected results, do not manage port administrative states with QuickTools or Enterprise Fabric Management Suite and the CLI at the same time. See also show port, page 259 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 209 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 210
notifications of fabric problems. Authority Admin session default is 0.0.0.0. Service port number that the primary SMTP server is monitoring for SMTP agents. The default is 25. Enables (True) or disables (False) the primary SMTP server. The default is False. IP default is True. 210 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 211
is an example of the set setup callhome command: 8/20q FC Switch (admin) #> set setup callhome A list of attributes activate this Callhome setup? (y/n): See also callhome, page 129 profile, page 175 set setup services, page 215 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 212
IP address (version 4 or 6) or DNS host name of the RADIUS server. The default is 10.0.0.1. User Datagram Protocol (UDP) port number on the RADIUS server. The default is 1812. Enable (True) or disable (False) this server for device authentication. The default is False. 212 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 213
default is False. 22-byte ASCII string (1-63 characters) used as a password for authentication purposes between the switch using the 'set setup services' command. Current Values: activate this radius setup? (y/n): [n] HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 214
the set setup radius server command: 8/20q FC Switch (admin) #> set setup radius server be enabled using the 'set setup services' command. Server 1 Current Values: (1-63 characters, recommend 22+) : Do you want to save and activate this radius setup? (y/n): [n] See also show setup radius, page 266 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 215
. QuickTools enables you to point at a switch with an internet browser and manage the switch. This parameter is the master control for the set setup system command parameter, EmbeddedGUIEnabled. The default is True. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 215 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 216
Home service which controls e-mail notification. The default is True. NOTE: The 8/20q Fibre Channel Switch Call Home service provides an e-mail notification capability for the switch. This service has no relationship with the HP Call Home feature, which notifies HP services. 216 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 217
the set setup services command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> set setup services A list ] Do you want to save and activate this services setup? (y/n): [n] See also show setup services, page 267 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 217 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 218
can be up to 64 characters excluding #, semicolon (;), and comma (,). The default is undefined. This value is also passed to the Call Home service configuration. Read community password that authorizes an SNMP agent to read information from the switch. This is a write-only field. The value on the - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 219
, max=32 chars) : WriteCommunity (string, max=32 chars) : AuthFailureTrap (True / False) : ProxyEnabled (True / False) : SNMPv3Enabled (True / False) : Do you want to save and activate this snmp setup? (y/n): [n] HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 219 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 220
is an example of the set setup snmp trap command: 8/20q FC Switch (admin) #> set setup snmp trap 1 A list of attributes Trap1Version (1 / 2) : Trap1Community (string, max=32 chars) : Do you want to save and activate this snmp setup? (y/n): [n] See also show setup snmp, page 268 220 Command - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 221
) • 3-DHCP version 6 The default is Static. IP addresses (version 4 or 6) of default is Static. A suffix that is appended to unqualified host names to extend the DNS search. You can specify up to five search lists (or suffixes). HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 222
10.0.0.1. EthIPv4NetworkMask Ethernet subnet mask address. The default is 255.0.0.0. EthIPv4GatewayAddress Ethernet IP address gateway. The default is 10.0.0.254 Operands ipv6 Prompts you in a line-by-line fashion to change the switch IPv6 Ethernet configuration parameters described in Table 54 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 223
in Table 57. To configure all system parameters, omit the operand. For each parameter, enter a new value or press Enter to accept the current value. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 223 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 224
out threshold. The default is 0, the maximum is 1440. Examples The following is an example of the set setup system dns command: 8/20q FC Switch (admin) #> set (domain name) : DNSSearchList5 (domain name) : Do you want to save and activate this system setup? (y/n): [n] 224 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 225
False) : EthIPv6Discovery (1=Static, 2=Dhcpv6, 3=Ndp) : EthIPv6NetworkAddress (IPv6 Address/Mask Length format) : EthIPv6GatewayAddress (IPv6 Address) : Do you want to save and activate this system setup? (y/n): [n] HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 225 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 226
want to save and activate this system setup? (y/n): [n] The following is an example of the set setup system ntp command: 8/20q FC Switch (admin) #> set setup NTPServerAddress (hostname, IPv4, or IPv6 Address) : Do you want to save and activate this system setup? (y/n): [n] 226 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 227
an example of the set setup system timers command: 8/20q FC Switch (admin) #> set setup system timers A list of Do you want to save and activate this system setup? (y/n): [n] See also show setup system, page 269 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 227 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 228
[state] Table 58 describes the switch administrative state parameters. Table 58 Switch administrative state parameters Parameter online offline diagnostics Description Activates and prepares the ports to send data. This is the default. Prevents the ports from receiving signal and accepting - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 229
the time zone for the switch and the workstation. The default is Universal Time (UTC), is an example of the set timezone command: 8/20q FC Switch (admin) #> set timezone Africa America Antarctica Asia page 277 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 229 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 230
of the switch Symbolic name of the switch Firmware version Date and time that the firmware was activated Results of the power-on self test Number of licensed ports Full Fabric indicates that the switch operates with the standard Fibre Channel port types: G, GL, F, FL, E, TR 230 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 231
version, page 280 HP StorageWorks 8/20q Fibre Channel Switch 10.20.11.192 :: 00:c0:dd:00:71:ee 10:00:00:c0:dd:00:71:ed FAM033100024 8/20q FC Switch V8.0.4.xx.xx day month date time year Passed 20 Full Fabric HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 231 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 232
is reset or power-cycled. Examples The following is an example of the show alarm command: 8/20q FC Switch #> show alarm [1][Fri Jan 19 13:50:26.508 UTC 2007][A][1004.000F][Port: 4][Eport Isolating due to Merge Zone Failure] [2][Fri Jan 19 13:50:26.513 UTC 2007][A][1004.0030][Topology change, lost - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 233
and receiving broadcast frames. Authority None Syntax show broadcast Examples The following is an example of the show broadcast command: 8/20q FC Switch #> show broadcast Group Member Ports ISL Ports 0 3 16 15 16 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 233 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 234
. Authority None Syntax show chassis Examples The following is an example of the show chassis command. 8/20q FC Switch #> show chassis Chassis Information BoardTemp (1) - Degrees Celsius BoardTemp (2) - Degrees Celsius BoardTemp (3) - Degrees Celsius PowerSupplyStatus (1) HeartBeatCode - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 235
of the show config port command for port 3: 8/20q FC Switch #> show config port 3 Configuration Name: default Port Number: 3 -----------AdminState 0 0 True True True False Auto True See also set config port, page 195 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 235 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 236
example of the show config security command: 8/20q FC Switch #> show config security Configuration Name: default Switch Security Configuration Information FabricBindingEnabled False AutoSave True Port ---0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Binding Status True True False - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 237
entries found. No port binding entries found. No port binding entries found. No port binding entries found. No port binding entries found. No port binding entries found. See also set config security portbinding, page 199 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 237 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 238
True SymbolicName 8/20q FC Switch R_A_TOV 10000 E_D_TOV 2000 PrincipalPriority 254 ConfigDescription Default Config ConfigLastSavedBy admin@OB-session5 ConfigLastSavedOn day month date time year InteropMode Standard See also set config switch, page 200 238 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 239
show config threshold command: 8/20q FC Switch #> show config threshold Configuration Name: default ------------ Threshold Configuration Information 5 SampleWindow 10 See also set config threshold, page 202 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 239 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 240
show config zoning Examples The following is an example of the show config zoning command: 8/20q FC Switch #> show config zoning Configuration Name: default Zoning Configuration Information MergeAutoSave True DefaultZone Allow DiscardInactive False See also set config zoning, page - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 241
None Syntax show domains Examples The following is an example of the show domains command: 8/20q FC Switch #> show domains Principal switch is (remote): 10:00:00:60:69:50:0b:6c Upstream Principal ISL is :00:00:c0:dd:00:b8:b7 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 241 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 242
command: 8/20q FC Switch #> show donor Port Config Ext Credit Max Credit Donated Member of Valid Groups to Number Type Requested Available to Port Donor Group Extend Credit 0 GL 0 16 None 0 0 1 GL 0 16 None 0 0 2 GL 0 16 None 0 0 3 GL 0 16 None 0 0 4 GL 0 16 None - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 243
show env Examples The following is an example of the show env command: 8/20q FC Switch #? show env Temperature(C) Sensors: Sensor ------ 0 1 2 3 Description 1.99 2.84 See also show temp, page 275 show voltage, page 282 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 243 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 244
IP address, and port IP address in the fabric. Authority None Syntax show fabric brief Operands brief Displays a table of switches switch The following is an example of the show fabric brief command: 8/20q FC Switch #> show fabric brief Domain WWN SymbolicName ------ --- ------------ *16 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 245
QLA2342 QL2330 Ports ----2 2 The following is an example of the show fdmi wwn command: 8/20q FC Switch #> show fdmi 21:00:00:e0:8b:09:3b:17 FDMI Information Manufacturer QLogic Corporation SerialNumber [04202 Model QLA2342 ModelDescription QLogic QLA2342 PCI Fibre Channel Adapter - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 246
Displays the status of the active network interfaces. Authority None Syntax show interface Examples The following is an example of the show interface command: 8/20q FC Switch #> show interface eth0 Link txqueuelen:0 RX bytes:272461 (266.0 Kb) TX bytes:272461 (266.0 Kb) 246 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 247
service events SNMP events Switch management events Zoning conflict events display [filter] Displays log events on the screen according to the component or severity level filter given by [filter].Table 61 describes the event log display filter parameters. HP StorageWorks 8/20q Fibre Channel Switch - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 248
, see the set log command. port Displays the ports being monitored for events. If an 20q FC Switch #> show log component Current settings for log FilterComponent NameServer MgmtServer Zoning Switch Blade Port Eport Snmp The following is an example of the show log level command: 8/20q FC Switch - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 249
Eport Port: 0/8][Sending LSU oxid=0xc:type=1] [334][day month date time year][I][Eport Port: 0/8][Send Zone Merge Request] [335][day month date time year][I][Eport Port: 0/8][LSDB Xchg timer set] See also set log, page 205 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 249 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 250
lsdb Examples The following is an example of the show lsdb command: 8/20q FC Switch #> show lsdb Link State Database Information LsID 34: Age=1176, Incarnation =7, RemotePort=6, Cost=500 NeighborDomain=35, LocalPort=4, RemotePort=5, Cost=250 Route: OutPort=16, Hops=2, Cost=350 250 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 251
. all Displays transceiver information for all ports. installed Displays transceiver information for all ports that have transceivers installed. Notes Table 62 describes the transceiver information in the show media display. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 251 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 252
or MX. MX indicates that the media supports both multimode 50 and 62.5 micron. MediaType may also be one of the following: • NotInstalled-transceiver is not installed. • Unknown-transceiver does not have a serial issued Vendor specified threshold below which an alarm is issued 252 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 253
following is an example of the show media command: 8/20q FC Switch #> show media 4 Port Number: 4 MediaType 800-MX-SN-S MediaVendor FINISAR CORP 2.90 2.00 0.082 0.028 LowAlarm -25.00 2.70 1.00 0.073 0.019 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 253 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 254
block units. NOTE: This operand will display memory activity updates until [count] is reached-it cannot be interrupted. Therefore, avoid using large values for [count]. Examples The following is an example of the show mem command: 8/20q FC Switch #> show mem procs -----------memory swap-- -----io - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 255
port given by [port_id]. [port_id] is a port Fibre Channel address. Examples The following is an example of the show ns (local domain) command: 8/20q FC Switch #> show ns Seq Domain Port Port FC4Type FCP FC4Desc (NULL) HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 255 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 256
to 20 lines (ON) or allows the continuous display of information without a break (OFF). Examples The following is an example of the show pagebreak command: 8/20q FC Switch #> show pagebreak current setting: ON See also set pagebreak, page 208 256 Command - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 257
ranges delimited by spaces. For example, 0 2 10-15 specifies ports 0, 2, 10, 11, 12, 13, 14, and 15. If you omit [port_list], the command displays performance data for ports 0-15. Type q and press Enter to stop the display. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 257 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 258
20q FC Switch #> show perf Port Bytes/s Bytes/s Number (in) (out) 0 7K 136M 1 58K 0 2 0 0 3 0 0 4 0 0 5 0 0 6 0 7K 7 136M 58K 8 7K 136M 9 58K 0 10 0 0 11 0 0 12 0 0 13 0 0 14 0 7K 15 136M 58K 16 258 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 259
time; or the number of class 2 and class 3 F_BSY frames generated by this port in response to incoming frames. This usually indicates a busy condition on the fabric or N_Port that is preventing delivery of this frame. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 259 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 260
switch to attempt to re-establish the link. If the link is not re-established, a link failure is counted. A link reset is performed after a link failure. Port transmission speed Port activity , as specified by FC-AL-2 Number of synchronization losses (>100 ms) detected by this port. A loss of - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 261
by this port Total number of frames issued by this port Total number of words issued by this port Number of link resets issued by this port Number of offline sequences issued by this port Transmitter status: True, False. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 261 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 262
is an example of the show port command: 8/20q FC Switch #> show port 1 Port Number: 1 ------------ AdminState Online OperationalState TestStatus NeverRun MaxCredit 16 UpstreamISL False MediaSpeeds 2Gb 0 TotalTxWords 0 TxLinkResets 0 TxOfflineSeq 0 262 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 263
log Examples The following is an example of the show postlog command: 8/20q FC Switch #> show postlog Queue: Sequence Count: Success Count: Failed Count: Records (0x34) 0 0/0 0x00000005 0x0082202b 0x00a2202b HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 263 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 264
20q Fibre Channel Switch Call Home service provides an e-mail notification capability for the switch. This service has no relationship with the HP Call Home feature, which notifies HP services @localhost.localdomain ThrottleDupsEnabled True + indicates active SMTP server See also set setup - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 265
00:c0:dd:0d:53:e7 PlanarPartNumber 31894-00 A SwitchSymbolicName 8/20q FC Switch SwitchWWN 10:00:00:c0:dd:0d:53:e7 SystemDescription HP StorageWorks 8/20q Fibre Channel Switch SystemObjectID 1.3.6.1.4.1.3873.1.11 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 265 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 266
and server-specific information, omit the operand. Refer to Table 48 for a description of the server-specific configuration parameters. Examples The following is an example of the show setup radius common command: 8/20q FC Switch #> show setup radius common Radius Information DeviceAuthOrder - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 267
example of the show setup services command: 8/20q FC Switch #> show setup services System Services TelnetEnabled True SSHEnabled False GUIMgmtEnabled CallHomeEnabled True See also set setup services, page 215 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 267 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 268
undefined> Location Description HP StorageWorks 8/20q FC Switch ObjectID 1.3.6.1.4.1.3873.1.11 AuthFailureTrap True ProxyEnabled an example of the show setup snmp trap command: 8/20q FC Switch #> show setup snmp trap 1 SNMP Information Trap1Enabled False - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 269
example of the show setup system dns command: 8/20q FC Switch #> show setup system dns System Information DNSClientEnabled DNSLocalHostname > Static HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 269 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 270
system ipv4 command: 8/20q FC Switch #> show setup system system ipv6 command: 8/20q FC Switch #> show setup system logging command: 8/20q FC Switch #> show setup system ntp command: 8/20q FC Switch #> show setup system setup system timers command: 8/20q FC Switch #> show setup system timers - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 271
is an example of the show steering command: 8/20q FC Switch #> show steering 35 DomainID -------35 DefaultOutPort 18 InPort OutPort 3 16/18/16/18 5 18/16/18/16 6 16/18/16/18 7 16/18/16/18 15 18/16/18/16 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 271 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 272
ID Fibre Channel address of switch port 0 Size of the flash memory, in megabytes Event severity level, used to record events in the event log Number of ports available on the switch Number of times the switch has been reset over its service life Action that caused the last reset Active firmware - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 273
(1) - Degrees Celsius SwitchTemperatureStatus 8/20q FC Switch 10:00:00:c0:dd:00 default Online False Off Online False 00000000 Passed 00000000 NeverRun 32 Normal See also set config switch, page 200 set switch state, page 228 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 274
system Examples The following is an example of the show system command: 8/20q FC Switch #> show system Assigned System Network Information Hostname EthIPv4NetworkAddress 10.20.116 20.10.10 See also set setup system, page 221 show setup system, page 269 274 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 275
Description Displays temperature information. Authority None Syntax show temp Examples 8/20q FC Switch #? show temp Temperature(C) Sensors: Sensor ------ 0 1 2 100 See also show env, page 243 show voltage, page 282 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 275 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 276
log file. Authority None Syntax show testlog or show test log Examples The following is an example of the show testlog command: 8/20q FC Switch #> show testlog Queue: UID Sequence Count: 1000 Success Count: 1000 Failed Count: 0 Records: 1 Record: 1 of 1 Time: day mon dd hh:mm:ss - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 277
Displays the current time zone setting. Authority None Syntax show timezone Examples The following is an example of the show timezone command: 8/20q FC Switch #> show timezone America/Chicago See also set timezone, page 229 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 277 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 278
ID -----010500 P 4(0x4) D The following is an example of the show topology command for port 1: 8/20q FC Switch #> show topology 1 Local Link Information PortNumber 1 PortID 650100 PortWWN 20:01:00:c0:dd:00 NL (NULL) 0.0.0.0 fc00:1234:5678:9abc:def0:1234:5678:9efg 278 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 279
show users brief command: 8/20q FC Switch #> show users brief User Client ---- ------ cim@OB-session1 cim snmp@IB-session2 Unknown snmp@OB-session3 Unknown admin@OB-session5 10.33.21.27 See also user, page 295 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 279 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 280
of the switch Symbolic name of the switch Firmware version Date and time that the firmware was activated Results of the power-on self test Number of licensed ports Full Fabric indicates that the switch operates with the standard Fibre Channel port types: G, GL, F, FL, E, TR 280 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 281
FAM033100024 SymbolicName 8/20q FC Switch ActiveSWVersion V8.0.4.xx.xx ActiveTimestamp day month date time year POSTStatus Passed LicensedPorts 20 SwitchMode Full Fabric See also show about, page 230 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 281 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 282
show voltage Description Displays voltage information. Authority None Syntax show voltage Examples 8/20q FC Switch #? show voltage Voltage Sensors: Sensor ------ 0 1 2 3 4 5 6 7 8 Description ----------2.5V 1. 1.99 2.84 See also show env, page 243 show temp, page 275 282 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 283
convenient points and closes the switch connection. Always power-cycle the switch after entering this command. Authority Admin session Syntax shutdown Notes When the shutdown is complete, the Heartbeat LED is extinguished. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 283 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 284
Manages SNMP version 3 user accounts on the switch. Authority Admin session except for the list Enables (True) or disables (False) privacy. The default is False. Privacy type. The default is DES. Privacy phrase Privacy phrase confirmation. Re-enter not require an Admin session. 284 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 285
8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> snmpv3user add A list of SNMPV3 user attributes with formatting and default values and activate this setup ? (y/n): [n] y SNMPV3 user account edited and activated. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 285 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 286
The following is an example of the snmpv3user list command: 8/20q FC Switch #> snmpv3user list Username -------snmpuser1 See also set setup snmp, page 218 show setup snmp, page 268 Group ----ReadWrite AuthType -------MD5 PrivType -------DES 286 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 287
the port given by [port_number]. [port_number] can be 0-19. Examples The following example cancels the test running on port 15: 8/20q FC Switch (admin) #> test cancel port 15 See also test port, page 288 test status, page 290 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 288
the most recent port test or port test in progress, enter the test status port command. Table 69 describes the port test parameters. Table 69 Port test parameters Parameter LoopCount FrameSize DataPattern StopOnError LoopForever Description Number of frames sent: 1-4294967295. The default is 100 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 289
. A notification with the test result(s) will appear on the screen when the test has completed. 8/20q FC Switch (admin) #> Test for port 1 Passed. See also test cancel, page 287 test status, page 290 test switch, page 292 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 289 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 290
switch command: 8/20q FC Switch #> test status switch Test Level ----Switch Test Type ---Offline internal Test Status -----Passed Loop Count ----- 4 Test Failures -------- 0 Port Num ---0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 290 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 291
See also test cancel, page 287 test port, page 288 test switch, page 292 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 291 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 292
72 Switch test parameters Parameter LoopCount FrameSize DataPattern Description Number of frames sent: 1-4294967295. The default is 100. Number of bytes in each test frame: 40-2148. The default is 256. 32-bit hexadecimal test value, or default, which defines random data 292 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 293
) [256 ] (32-bit hex value or 'Default') [Default] (True / False) [True ] (True / False) [False ] Do you want to start the test? (y/n) [n] y See also test cancel, page 287 test status, page 290 test switch, page 292 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 293 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 294
and the reset method. A hot reset or non-disruptive firmware activation does not reset the elapsed up time reported by this command. Authority None Syntax uptime Examples The following is an example of the uptime command: 8/20q FC Switch #> uptime Elapsed up time : 0 day(s), 2 hour(s), 28 min(s), 44 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 295
user list brief command. Notes Authority level or password changes that you make to an account that is an example of the user accounts command: 8/20q FC Switch (admin) #> user accounts Current list of True , never expires) HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 295 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 296
add command: 8/20q FC Switch (admin) #> user add Press 'q' and the ENTER key to abort this command. account name (1-15 chars) : user1 account password (8-20 chars) : ******* please confirm account password: ******* set See also passwd, page 173 show users, page 279 296 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 297
None Syntax whoami Examples The following is an example of the whoami command: 8/20q FC Switch #> whoami User name : admin@session2 Switch name : HP StorageWorks 8/20q Fibre Channel Switch Switch domain ID: 21 (0x15) HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 297 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 298
switch port number pair (Domain ID, Port Number). Domain IDs can be 1-239; port numbers can be 0-255. • 6-character hexadecimal device Fibre Channel address (hex) • 16 zoning database supports a maximum of active zoneset, the zone will not be removed from the active zoneset until the active Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 299
:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2f The following is an example of the zone orphans command: 8/20q FC Switch #> zone orphans Current list of orphan zones zone3 zone4 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 299 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 300
The following is an example of the zone zonesets command: 8/20q FC Switch #> zone zonesets zone1 Current List of ZoneSets for Zone: zone1 zone_set_1 See also zoneset, page 301 zoning edit, page 308 300 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 301
]. Use a to delimit zone names in [zone_list]. If [zone_set] is the active zoneset, the zone will not be removed until the zoneset has been deactivated. You must enter the zoning save command to save your changes. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 301 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 302
by [zone_set_new]. You can rename the active zoneset. You must enter the zoning the zoneset active command: 8/20q FC Switch #> zoneset active Active ZoneSet 20q FC Switch #> zoneset list Current List of ZoneSets alpha beta The following is an example of the Zoneset Zones command: 8/20q FC Switch - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 303
FC Switch (admin) #> zoning active capture This command will overwrite the configured zoning database in NVRAM. Please confirm (y/n): [n] y The active zoning database has been saved. See also zone, page 298 zoneset, page 301 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 304
session. Syntax zoning cancel Examples The following is an example of the zoning cancel command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> zoning edit . . . 8/20q FC Switch (admin-zoning) #> zoning cancel Zoning edit mode will be canceled. Please confirm (y/n): [n] y See also zoning - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 305
of the zoning clear command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> zoning edit 8/20q FC Switch (admin-zoning) #> zoning clear 8/20q FC Switch (admin-zoning) #> zoning save See also zoning save, page 315 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 305 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 306
Examples The following is an example of the zoning configured command: 8/20q FC Switch #> zoning configured Configured (saved in NVRAM) Zoning Information ZoneSet Zone ZoneMember 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:22:14:16 wwn_2215c3 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18: - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 307
Switch #> admin start 8/20q FC Switch (admin) #> zoning delete orphans This command will remove all zonesets, zones, and aliases that are not currently active. Please confirm (y/n): [n] y 8/20q FC Switch (admin) #> zoning save HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 308
edit 8/20q FC Switch (admin-zoning) #> . . 8/20q FC Switch (admin-zoning) #> zoning save The changes have been saved; however, they must be activated before they can take effect -- see Zoneset Activate command. See also zone, page 298 zoneset, page 301 zoning cancel, page 304 308 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 309
Switch (admin-zoning) #> zoning edited Edited (unsaved) Zoning Information ZoneSet Zone ZoneMember ------- ---- ---------- ZS1 Z1 10:00:00:c0:dd:00:b9:f9 10:00:00:c0:dd:00:b9:fa See also zoning configured, page 306 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 310
The following is an example of the zoning history command: 8/20q FC Switch #> zoning history Active Database Information ZoneSetLastActivated/DeactivatedBy ZoneSetLastActivated/DeactivatedOn Database Checksum Remote day admin@OB-session17 day mon date hh:mm:ss yyyy 00000000 310 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 311
non-volatile or active). If you switch's zoning database is 2,000. Each instance of a zone in a zoneset counts toward this maximum. Maximum number of members in a zone is 2,000. Maximum number of members in an alias is 2,000. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 312
an example of the zoning list command: 8/20q FC Switch #> zoning list Active (enforced) ZoneSet Information ZoneSet Zone ZoneMember wwn bf:d2:18:d2 10:00:00:00:c9:22:14:16 wwn_2215c3 50:06:04:82:bf:d2:18:c2 50: d2:18:d2 10:00:00:00:c9:22:14:16 wwn_2215c3 50:06:04:82:bf:d2:18:c2 50: - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 313
. Examples The following is an example of the zoning merged command: 8/20q FC Switch #> zoning merged To permanently save the merged database locally, execute the 306 zoning edited, page 309 zoning list, page 312 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 313 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 314
the MergeAutoSave parameter is False (see Table 20), you can use this command to revert changes to the merged zoneset that were propagated from another switch in the fabric through zoneset activation or merging fabrics. Authority Admin session Syntax zoning restore 314 Command - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 315
Switch (admin-zoning) #> . . 8/20q FC Switch (admin-zoning) #> zoning save The changes have been saved; however, they must be activated before they can take effect -- see zoneset activate command. See also zoning edit, page 308 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 316
316 Command Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 317
country/us/en/contact_us.html). To contact HP by phone, call: 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days a week. For continuous quality improvement, calls may be recorded or monitored. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 317 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 318
Fibre Channel Switch Rack Mount Kit Quick Start Installation Instructions • HP StorageWorks Simple SAN Connection Manager User Guide • HP StorageWorks 8/20q Fibre Channel Switch Installation and Reference Guide • HP StorageWorks 8/20q Fibre Channel Switch QuickTools Switch Management User Guide • HP - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 319
the courier/carrier to be used. For more information about the HP Customer Self Repair program, contact your local service provider. For the North American program, visit the HP website (http://www.hp.com/go/selfrepair). HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 319 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 320
320 Support and Other Resources - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 321
115 messages 106 queue 106 requirements 105 resetting 109 service 105, 108, 216 technical support interface 107 Callhome command 129 Changeover example Clear example 116 Config Port command 135 example 62 command entry 12 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 321 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 322
command 139 Certificate example 84 Support example 13 credit donor 242 decode errors 65 defaults, switch configuration 182 322 activation 50 DNS - See Domain Name System document conventions 317 documentation, HP website 318 domain ID binding 149, 151 displaying 241 Domain Name System 24 donor port - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 323
55 feature upgrade 55, 145 Fibre Channel connection 55 routing 55 file downloading and uploading 15 File Transfer Protocol downloading files 15, 46 downloading firmware 51 restoring configuration file 46 service 216 user account 17 firmware 50, 157 activation 50 custom installation 52 displaying - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 324
method 223 interaction with Date command 141 server address 223 service 216 non-disruptive activation 50, 157 N-Port ID Virtualization 62, 63 NTP See Network Time Protocol O offline test port 68, 288 switch 292 online test port 288 switch 292 operands 125 operational information 37 orphan zones 73 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 325
76 Factory example 76 IP Security example 25 Ipsec example 33 Port example 65 Security example 94 service 83, 215 Secure Socket Layer certificate 84, 139 description 83 service 83, 215 switch activating 95, 191 active 90 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 325 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 326
94, 191 Securityset command 191 Activate example 95 Active example 91 Add example 95 Copy services displaying 42, 84 managing 42 Set Beacon command 47 Set Config Port command 195 example 61 Set Config Security command 198 example 93 Set Config Security Port command 199 example 65 Set Config Switch - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 327
service 117, 216 user account 122 version 3 121, 284 Simple SAN 38 T technical support, HP 13, 317 Telnet connection security 83 logging in 11 service 215 session timeout upgrade licenses 55, 145 Uptime command 294 example 38 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 328
279 modifying 18, 295 password 19 user administration 295 User service 215 websites HP documentation 318 HP storage 318 HP Subscriber 298 removing from zone set 79 removing member port 80, 299 renaming 80, 299 Zone 78, 302 Zoneset command 301 Activate example 79 Active example 71 Add example 79 Copy - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 329
command 311 example 75 Zoning List command 312 example 70 Zoning Merged command 313 Capture example 77 Zoning Restore command 314 Zoning Save command 315 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 329 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 330
330 Index
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
 |
 |
HP StorageWorks 8/20q Fibre Channel Switch
Command Line Interface Guide
This guide provides information about using the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface
(CLI), including fabric, switch, and port management tasks. This guide also provides an alphabetical listing of the the CLI
commands, including the command syntax, operands, and notes, and examples of their use. This guide is for users who
are responsible for installing and servicing Fibre Channel equipment using the command line interface.
Part number: 5697-0418
Published June 2010
Edition: 2