HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 177
The following is an example of the, command, profile edit
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
The following is an example of the profile edit command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> callhome edit 8/20q FC Switch (admin-callhome) #> profile edit profile_1 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Current Values: Level Alarm Format ShortText MaxSize 1000 EmailSubject Switch Problem RecipientEmail (up to 10 entries allowed) 1. [email protected] New Value (press ENTER to accept current value, 'q' to quit): Level (Alarm,Critical,Warn,None) : Format (1=FullText, 2=ShortText, 3=Tsc1) : MaxSize (decimal value, 650-2000000) : EmailSubject (string, max=64 chars, N=None) : RecipientEmail (ex: [email protected], N=None) 1. [email protected] : 2. : The profile has been edited. This configuration must be saved with the 'callhome save' command before it can take effect, or to discard this configuration use the 'callhome cancel' command. 8/20q FC Switch (admin-callhome) #> callhome save The CallHome database profiles will be saved and activated. Please confirm (y/n): [n] y See also callhome, page 129 capture, page 132 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 177